BDP-150 BDP-150-K BDP-150-S

Add to my manuals
52 Pages

advertisement

BDP-150 BDP-150-K BDP-150-S | Manualzz

BDP-150_VXE8_IBD_EN.book 40 ページ 2012年3月12日 月曜日 午後4時10分

07

5 Select and set Start.

Press ENTER.

6 Downloading of the software start.

The software download status is displayed on the screen.

• Depending on the Internet connection conditions, software downloading may take a certain period of time.

7 Updating starts.

• Software updating may take a certain period of time.

8 Updating completes.

This unit automatically restarts.

Updating using a USB flash drive/

disc

4 Select and set Options

Update Disc or USB

Storage

Start.

Use / to select, then press ENTER.

5 Select and set Yes.

Use

/// to select Yes, then press ENTER.

6 Updating starts.

• Software updating may take a certain period of time.

7 Updating completes.

Restoring all the settings to the factory default settings

Note

• When an update file is provided on the Pioneer website, use your computer to download it onto a

USB flash drive or disc. Carefully read the instructions on downloading update files provided on the Pioneer website.

• Store the update file in the root directory of the USB flash drive or disc. Do not store it within a folder.

• Do not put any files other than the update file on the

USB flash drive or disc.

• To update using a disc, use a CD-R or CD-RW disc.

• The player supports USB flash drives formatted in

FAT32/16. When formatting a USB flash drive on your computer, do so with the settings below.

– File system: FAT32

– Allocation unit size: Default allocation size

• Only store the most recent update file on the USB flash drive or disc.

• Do not use a USB extension cable to connect a USB flash drive to the player. Using a USB extension cable may prevent the player from performing correctly.

• Steps

1 to

5

are the operations performed by the user.

• Steps 6 to

7

are the operations performed

(automatically) by the player (they are intended to update the software).

1 Plug in the USB flash drive or load the disc on which the update file is stored.

2 When playback is stopped, display the Home

Menu screen.

Press HOME MENU.

3 Select and set Initial Setup.

Use

/ to select, then press ENTER.

1 Check that the player’s power is turned on.

2 When playback is stopped, display the Home

Menu screen.

Press HOME MENU.

3 Select and set Initial Setup.

Use / to select, then press ENTER.

4 Select and set Options

Load Default Next

Screen.

Use

/ to select, then press ENTER.

5 Select and set OK.

Use / to select, then press ENTER.

Note

• After restoring all the settings to the factory default settings, use Setup Navigator to reset the player

(page 19).

40

En

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents