Using the timer. Gardena R70Li - 2017, R40Li - 2017, R38Li - 2017, R50Li - 2017, R80Li - 2017

Add to my manuals
88 Pages

advertisement

Using the timer. Gardena R70Li - 2017, R40Li - 2017, R38Li - 2017, R50Li - 2017, R80Li - 2017 | Manualzz

4. USE

4.2 Using the timer

Use the timer function (see 6.3 Timer.) to avoid a downtrodden lawn. When setting the timer, calculate that the robotic lawnmower mows about the listed amount of the number of square meters per hour and day listed in table Work capacity.

Example

If the working area is 360 m

2

in size, R70Li must operate for 8 hours a day. The times are approximate and depend for instance on grass quality, blade sharpness and battery age.

Table Work capacity

Model

GARDENA R38Li

GARDENA R40Li

GARDENA R45Li

GARDENA R50Li

GARDENA R70Li

GARDENA R80Li

IMPORTANT INFORMATION

Use the timer to avoid mowing when there are usually children, pets and anything else that could be damaged by the rotating blades on the lawn.

The factory setting for the timer is 07:00-23:00

(07:00-22:00 for the GARDENA

R38Li,R40Li,R45Li,R50Li) and it allows mowing every day of the week. This setting is suitable for the listed maximum working area.

If the size of the working area allows it, the quality of the grass can be further improved if it is cut every other day instead of a few hours every day. In addition, the grass benefits from resting completely during at least a three-day period once a month.

Table Standby time

Model

GARDENA R38Li

GARDENA R40Li

GARDENA R45Li

GARDENA R50Li

GARDENA R70Li

GARDENA R80Li

Work capacity

About 32 m

2 per hour and day

About 33 m

2 per hour and day

About 38 m

2 per hour and day

About 42 m

2 per hour and day

About 44 m

2 per hour and day

About 50 m

2 per hour and day

Standby time

At least 12 hours per day

At least 12 hours per day

At least 12 hours per day

At least 12 hours per day

At least 8 hours per day

At least 8 hours per day

Standby

The robotic lawnmower has an inbuilt standby period according to the Standby time table. The standby period provides for instance a good opportunity to water or play games on the lawn.

Example 1

The times used in this example are applicable to

GARDENA R40Li, but the principle is the same for the other models.

Work period 1: 07:00 - 22:00

Work days: All days

The factory setting ensures that the robotic lawnmower begins cutting the lawn at 07.00. The mower is parked in the charging station from

19.00 and rests until it starts cutting again at

07.00.

If the timer setting is divided into two work periods, the standby period can be divided into a number of periods. The minimum standby period time must however be a according to the

Standby time table.

B

Standby

R40Li

Operation

Charging/Standby

24 h

Mowing

Charging

Operation

B = Min 12 h

A

38 - English

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals