Operator`s Manual for Basic Functions CX1145 MFP

Add to my manuals
341 Pages

advertisement

Operator`s Manual for Basic Functions CX1145 MFP | Manualzz

1.Description of Each Component (Cont.)

1

Control panel

Use the buttons on the control panel for various operations and settings through the equipment.

11

1. [HELP] button

Use this button to display the description of the functions and the buttons on the touch panel.

2. [USER FUNCTIONS] button

Use this button for paper size or media type setting of drawers, and registration of the copy, scan and

FAX settings (including a default setting change.) See the User Functions Guide for the functions enabled by this button.

3. [TEMPLATE] button

Use this button to register and recall frequently used copy, scan, and Fax settings as a template.

4. [EXTENSION] button

Any operation with this button is invalid at present. This button is to extend functions in the future.

5. [e-FILING] button

Use this button to access saved image data.

6. [SCAN] button

Use this button to use the scanning function.

7. [COPY] button

Use this button to use the copier function.

8. [FAX] button

Use this button to use the FAX / Internet FAX function.

9. PRINT DATA / MEMORY RX / FAX communication lamps

These lamps show the status of FAX data reception and FAX communication. The equipment can be operated even while these lamps are lit.

10. [INTERRUPT] button

Use this button to interrupt the copy job in process and perform another one. The interrupted job is resumed by your pressing this button again.

1.BEFORE USING EQUIPMENT

11. [JOB STATUS] button

Use this button to confirm each job status, printing status, and FAX transmission/reception status of a

print job, scan job and FAX job. (

! P.223 “1.Job Status”)

12. [ACCESS] button

Use this button when the department code or user information has been set. If this button is pressed after copying, the next user cannot use functions such as copying without keying in the department code or user information. See the User Functions Guide for the department and user management.

13. [ENERGY SAVER] button

Use this button when you want to shut down the equipment or when you want the equipment enter into the energy saving mode. When you press this button, the menu for the energy saving mode appears.

Press the [SLEEP] button on this menu to enter into the energy saving mode and press the [SHUT-

DOWN] button to shut down the equipment.

14. [FUNCTION CLEAR] button

When this button is pressed, all selected functions are cleared and returned to the default settings. If the default setting is changed on the control panel, and copying, scanning, Fax or similar is performed, the [FUNCTION CLEAR] button blinks.

15. [STOP] button

Use this button to stop any scanning and copying operations in progress.

16. [START] button

Use this button to start copying, scanning and FAX operations.

17. [CLEAR] button

Use this button to correct numbers keyed in, such as the copy quantity.

18. ERROR lamp

This lamp lights when an error occurs and the equipment needs some actions to be taken.

19. [MONITOR/PAUSE] button

Use this button only when a FAX Unit (optional) is installed. (See the Operator’s Manual for Facsimile

Function for details.)

20. Digital keys

Use these keys to enter any numbers such as the copy quantity.

21. Touch panel

Use this panel for the various settings of each function of the copier, scanner and FAX. This panel also indicates the status of the equipment, such as when you run out of paper or there is a paper jam.

1

12

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents