Operator`s Manual for Basic Functions CX1145 MFP

Add to my manuals
341 Pages

advertisement

Operator`s Manual for Basic Functions CX1145 MFP | Manualzz

Magazine sort & saddle stitch mode (booklet mode)

In the magazine sort mode, more than one original can be copied and bound like magazines or booklets.

Also, a set of copied sheets can be automatically folded and stapled at its center when the Saddle Stitch

Finisher (optional) is installed. The available copy paper sizes for these modes are LD, LT-R and LG.

• Special paper such as OHP films or sticker label cannot be used for saddle stitching.

• The paper weight applicable for this mode is 17 to 28 lb. Bond.

When placing portrait originals horizontal to you in the magazine sort mode, set the Image Direction in the

edit menu. Otherwise the originals will not be copied in the proper page order. (

! P.158 “14.IMAGE

DIRECTION”)

1. When [MAGAZINE SORT] is selected

3

1

2

3

12

2. When [MAGAZINE SORT & SADDLE STITCH] is selected

6

4

2

7

9

11

1

2

3

3. When [SADDLE STITCH] is selected

12

6 7

12

10

8

1

3

5

6 7

You can select the magazine sort mode from the edit menu, as well as from the basic menu. When this mode is selected from the edit menu, you can adjust the binding margin of the copy. To select this

mode from the edit menu, see

! P.136 “6.MAGAZINE SORT”.

90

4.Selecting Finishing Modes (Cont.)

3

1 Place paper in the drawer(s).

2 Select the paper size.

• Available copy paper sizes are LD, LT-R and LG.

• For bypass copying, see

! P.58 “3.Bypass Copying”.

To use the saddle stitch mode for LD or LG-size paper, lift the stopper of the saddle stitch tray.

3 Place the original(s).

• When placing originals on the Reversing Automatic Document Feeder, see the illustrations (

! P.90) for the

proper page order of the copies.

• When placing originals on the original glass, follow the procedure below.

- When [MAGAZINE SORT] or [MAGAZINE SORT & SADDLE STITCH] is selected: Place the first page of the originals first.

- When [SADDLE STITCH] is selected: In case of 12-page originals, set them in the order of pages 12-1, 2-

11, 10-3, 4-9, 8-5, then 6-7.

4

Press the finisher button on the basic menu.

91

3.SETTING BASIC COPY MODES

5 Press the [MAGAZINE SORT] (or [MAGAZINE SORT & SADDLE

STITCH] or [SADDLE STITCH]) button.

• The [MAGAZINE SORT & SADDLE STITCH] button and the [SADDLE STITCH] button are selectable only when the Saddle Stitch Finisher is installed.

• Set other copy modes as required.

6 Press the [START] button.

• When placing the originals on the original glass, follow the procedure in

! P.45 “Placing originals on the glass”.

Available conditions for saddle stitching

Available paper sizes are LD, LT-R and LG.

Paper weight

17 lb. Bond

20 lb. Bond

24 lb. Bond

*1

28 lb. Bond

*1

Saddle stitch tray loading capacity

11 - 15 sheets

10 sets

6 - 10 sheets

20 sets

5 sheets or less

25 sets

10 sets

-

-

20 sets

15 sets

15 sets

25 sets

25 sets

25 sets

*1 When the cover is added, the tray loading capacity is always 5 sets.

• One cover of 17 lb. Bond to 110 lb. Index can be added. In this case, this cover is included in the maximum number of sheets that can have saddle stitching.

• When paper of a different weight is loaded, count the number of sheets for saddle stitching as applied to the paper with the highest weight.

3

92

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents