advertisement
7. CRONO 7 PROGRAMMING
Programming of the CRONO 7 allows to set/modify the following parameters:
- comfort and economy temperature levels (different for the “central heating” and “cooling” modes);
- daily/weekly functioning time program (different for the
“central heating” and “cooling” modes).
7.1 Setting comfort and economy room temperature.
The two temperatures are different depending whether they are in "winter" or "chiller" mode.
By pressing the button, the “comfort” (fig. 19) and
“economy” (fig. 20) temperatures are displayed alternately.
To regulate both parameters, just press the + / - buttons to regulate the temperature according to requirements.
To confirm the new temperature, press the button, to exit without saving the modifications, press the button.
Fig. 19
Fig. 20
19
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 4 How to use the instruction book
- 4 Foreword
- 4 General recommendations
- 5 Case cleaning
- 6 1. Installation
- 6 1.1 Installation recommendations
- 6 1.2 Installation operations
- 9 2. Description of Controls
- 10 3. Description of display
- 11 3.1 Back-lighting
- 12 4. Start-up
- 12 4.1 Programming current day and time
- 12 4.2 Selection of functioning mode
- 14 5. Winter mode functions
- 14 5.1 Manual functioning
- 15 5.2 Automatic functioning
- 15 5.3 Forced automatic functioning
- 16 5.4 Room anti-freeze function
- 17 6. Chiller control mode functions
- 17 6.1 Manual functioning
- 18 6.2 Automatic functioning
- 18 6.3 Forced automatic functioning
- 19 7. CRONO 7 programming
- 20 7.2 Programming functioning time
- 21 8. Diagnostics and errors
- 21 8.1 Errors
- 22 9. Special functions
- 22 9.1 INFORMATION
- 22 9.2 LANGUAGE (language selection)
- 22 9.3 CHILLER
- 23 9.5 VACANZ (holiday program)
- 23 9.6 REMOTE (telephone control)
- 23 9.7 CODE
- 23 9.8 Reset of CRONO
- 24 10. Functions protected by code (CODE)
- 24 functioning mode)
- 24 10.2 ANTIGL (anti-freeze level)
- 24 10.3 MANUTZ (programmed maintenance)
- 25 10.4 HYSTERESIS
- 25 11. Replace the batteries
- 26 12. Technical characteristics
- 26 12.1 Product specifications
- 27 13. Factory setting