Trap Hierarchy. Aruba IAP-135, RAP-108, IAP-175P, Instant, RAP-3WN, AP-114, IAP-104, IAP-92, RAP-155P, AP-304
Advertisement
Advertisement
Chapter 5
Traps
This module defines the traps that can be generated by the IAP. Traps are MIB objects (variables) that transmit information to the SNMP Manager when an event occurs. Traps are included as varbinds (variable bindings) in the trap protocol data unit (PDU). Varbinds are defined in the Description section below.
Figure 5 shows the architecture of the Traps MIB relative to 1.3.6.1.4.1.14823
(iso.org.dod.internet.private.enterprise.aruba). The Traps are listed in the file aruba-trap.my MIB file. For information about downloading Aruba MIB files, see “Downloading MIB Files” on page 23 .
Trap Hierarchy
Figure 5 Trap Hierarchy
Aruba Instant 6.2.1.0-3.3 | MIB Reference Guide Traps |
61
62
| Traps
ai Traps Objects Group
The following table lists the supported trap objects in this group:
Table 10 aiTraps Objects Group OIDs
Object Object ID
wlsxTrapAPMacAddress wlsxTrapAPIpAddress wlsxTrapAPBSSID wlsxTrapEssid
wlsxTrapTargetAPBSSID wlsxTrapTargetAPSSID wlsxTrapTargetAPChannel wlsxTrapNodeMac wlsxTrapSourceMac
wlsxTrapRogueIfoURL wlsxTrapVLANId wlsxTrapAdminStatus wlsxTrapOperStatus wlsxTrapAuthServerName
1.3.6.1.4.1.14823.2.3.3.1.200.1.1
1.3.6.1.4.1.14823.2.3.3.1.200.1.2
1.3.6.1.4.1.14823.2.3.3.1.200.1.3
1.3.6.1.4.1.14823.2.3.3.1.200.1.4
1.3.6.1.4.1.14823.2.3.3.1.200.1.5
1.3.6.1.4.1.14823.2.3.3.1.200.1.6
1.3.6.1.4.1.14823.2.3.3.1.200.1.7
1.3.6.1.4.1.14823.2.3.3.1.200.1.8
wlsxTrapObjectsGroup 1 wlsxTrapObjectsGroup 2 wlsxTrapObjectsGroup 3 wlsxTrapObjectsGroup 4 wlsxTrapObjectsGroup 5 wlsxTrapObjectsGroup 6 wlsxTrapObjectsGroup 7 wlsxTrapObjectsGroup 8
1.3.6.1.4.1.14823.2.3.3.1.200.1.9
wlsxTrapObjectsGroup 9
1.3.6.1.4.1.14823.2.3.3.1.200.1.10
wlsxTrapObjectsGroup 10
1.3.6.1.4.1.14823.2.3.3.1.200.1.11
wlsxTrapObjectsGroup 11
1.3.6.1.4.1.14823.2.3.3.1.200.1.12
wlsxTrapObjectsGroup 12
1.3.6.1.4.1.14823.2.3.3.1.200.1.13
wlsxTrapObjectsGroup 13
1.3.6.1.4.1.14823.2.3.3.1.200.1.14
wlsxTrapObjectsGroup 14
1.3.6.1.4.1.14823.2.3.3.1.200.1.15
wlsxTrapObjectsGroup 15
1.3.6.1.4.1.14823.2.3.3.1.200.1.16
wlsxTrapObjectsGroup 16
1.3.6.1.4.1.14823.2.3.3.1.200.1.17
wlsxTrapObjectsGroup 17
1.3.6.1.4.1.14823.2.3.3.1.200.1.18
wlsxTrapObjectsGroup 18
1.3.6.1.4.1.14823.2.3.3.1.200.1.19
wlsxTrapObjectsGroup 19
1.3.6.1.4.1.14823.2.3.3.1.200.1.20
wlsxTrapObjectsGroup 20
1.3.6.1.4.1.14823.2.3.3.1.200.1.21
wlsxTrapObjectsGroup 21
1.3.6.1.4.1.14823.2.3.3.1.200.1.22
wlsxTrapObjectsGroup 22
1.3.6.1.4.1.14823.2.3.3.1.200.1.23
wlsxTrapObjectsGroup 23
1.3.6.1.4.1.14823.2.3.3.1.200.1.24
wlsxTrapObjectsGroup 24
1.3.6.1.4.1.14823.2.3.3.1.200.1.25
wlsxTrapObjectsGroup 25
1.3.6.1.4.1.14823.2.3.3.1.200.1.26
wlsxTrapObjectsGroup 26
Aruba Instant 6.2.1.0-3.3 | MIB Reference Guide
Table 10 aiTraps Objects Group OIDs (Continued)
Object Object ID
wlsxTrapUserPhyAddress wlsxTrapUserName wlsxTrapUserRole
1.3.6.1.4.1.14823.2.3.3.1.200.1.27
wlsxTrapObjectsGroup 27
1.3.6.1.4.1.14823.2.3.3.1.200.1.28
wlsxTrapObjectsGroup 28
1.3.6.1.4.1.14823.2.3.3.1.200.1.29
wlsxTrapObjectsGroup 29
1.3.6.1.4.1.14823.2.3.3.1.200.1.30
wlsxTrapObjectsGroup 30
1.3.6.1.4.1.14823.2.3.3.1.200.1.31
wlsxTrapObjectsGroup 31
1.3.6.1.4.1.14823.2.3.3.1.200.1.32
wlsxTrapObjectsGroup 32
1.3.6.1.4.1.14823.2.3.3.1.200.1.33
wlsxTrapObjectsGroup 33
1.3.6.1.4.1.14823.2.3.3.1.200.1.34
wlsxTrapObjectsGroup 34
1.3.6.1.4.1.14823.2.3.3.1.200.1.35
wlsxTrapObjectsGroup 35
1.3.6.1.4.1.14823.2.3.3.1.200.1.36
wlsxTrapObjectsGroup 36
1.3.6.1.4.1.14823.2.3.3.1.200.1.37
wlsxTrapObjectsGroup 37
1.3.6.1.4.1.14823.2.3.3.1.200.1.38
wlsxTrapObjectsGroup 38
1.3.6.1.4.1.14823.2.3.3.1.200.1.39
wlsxTrapObjectsGroup 39
1.3.6.1.4.1.14823.2.3.3.1.200.1.40
wlsxTrapObjectsGroup 40
1.3.6.1.4.1.14823.2.3.3.1.200.1.41
wlsxTrapObjectsGroup 41
1.3.6.1.4.1.14823.2.3.3.1.200.1.42
wlsxTrapObjectsGroup 42
1.3.6.1.4.1.14823.2.3.3.1.200.1.43
wlsxTrapObjectsGroup 43
1.3.6.1.4.1.14823.2.3.3.1.200.1.44
wlsxTrapObjectsGroup 44
1.3.6.1.4.1.14823.2.3.3.1.200.1.45
wlsxTrapObjectsGroup 45
1.3.6.1.4.1.14823.2.3.3.1.200.1.46
wlsxTrapObjectsGroup 46
1.3.6.1.4.1.14823.2.3.3.1.200.1.47
wlsxTrapObjectsGroup 47
1.3.6.1.4.1.14823.2.3.3.1.200.1.48
wlsxTrapObjectsGroup 48
1.3.6.1.4.1.14823.2.3.3.1.200.1.49
wlsxTrapObjectsGroup 49
1.3.6.1.4.1.14823.2.3.3.1.200.1.50
wlsxTrapObjectsGroup 50
1.3.6.1.4.1.14823.2.3.3.1.200.1.51
wlsxTrapObjectsGroup 51
1.3.6.1.4.1.14823.2.3.3.1.200.1.52
wlsxTrapObjectsGroup 52
1.3.6.1.4.1.14823.2.3.3.1.200.1.53
wlsxTrapObjectsGroup 53
1.3.6.1.4.1.14823.2.3.3.1.200.1.54
wlsxTrapObjectsGroup 54
Aruba Instant 6.2.1.0-3.3 | MIB Reference Guide Traps |
63
64
| Traps
Table 10 aiTraps Objects Group OIDs (Continued)
Object Object ID
wlsxTrapUserAuthenticationMethod wlsxTrapAPRadioNumber wlsxTrapRogueInfoURL
wlsxTraptimeStr wlsxTrapMasterIp
1.3.6.1.4.1.14823.2.3.3.1.200.1.55
wlsxTrapObjectsGroup 55
1.3.6.1.4.1.14823.2.3.3.1.200.1.56
wlsxTrapObjectsGroup 56
1.3.6.1.4.1.14823.2.3.3.1.200.1.57
wlsxTrapObjectsGroup 57
1.3.6.1.4.1.14823.2.3.3.1.200.1.58
wlsxTrapObjectsGroup 58
1.3.6.1.4.1.14823.2.3.3.1.200.1.59
wlsxTrapObjectsGroup 59
1.3.6.1.4.1.14823.2.3.3.1.200.1.60
wlsxTrapObjectsGroup 60
1.3.6.1.4.1.14823.2.3.3.1.200.1.61
wlsxTrapObjectsGroup 61
1.3.6.1.4.1.14823.2.3.3.1.200.1.63
wlsxTrapObjectsGroup 62
1.3.6.1.4.1.14823.2.3.3.1.200.1.63
wlsxTrapObjectsGroup 63
1.3.6.1.4.1.14823.2.3.3.1.200.1.65
wlsxTrapObjectsGroup 65
1.3.6.1.4.1.14823.2.3.3.1.200.1.66
wlsxTrapObjectsGroup 66
1.3.6.1.4.1.14823.2.3.3.1.200.1.67
wlsxTrapObjectsGroup 67
1.3.6.1.4.1.14823.2.3.3.1.200.1.68
wlsxTrapObjectsGroup 68
1.3.6.1.4.1.14823.2.3.3.1.200.1.69
wlsxTrapObjectsGroup 69
1.3.6.1.4.1.14823.2.3.3.1.200.1.70
wlsxTrapObjectsGroup 70
1.3.6.1.4.1.14823.2.3.3.1.200.1.71
wlsxTrapObjectsGroup 71
1.3.6.1.4.1.14823.2.3.3.1.200.1.72
wlsxTrapObjectsGroup 72
1.3.6.1.4.1.14823.2.3.3.1.200.1.73
wlsxTrapObjectsGroup 73
1.3.6.1.4.1.14823.2.3.3.1.200.1.74
wlsxTrapObjectsGroup 74
1.3.6.1.4.1.14823.2.3.3.1.200.1.75
wlsxTrapObjectsGroup 75
1.3.6.1.4.1.14823.2.3.3.1.200.1.76
wlsxTrapObjectsGroup 76
1.3.6.1.4.1.14823.2.3.3.1.200.1.78
wlsxTrapObjectsGroup 78
1.3.6.1.4.1.14823.2.3.3.1.200.1.79
wlsxTrapObjectsGroup 79
1.3.6.1.4.1.14823.2.3.3.1.200.1.80
wlsxTrapObjectsGroup 80
1.3.6.1.4.1.14823.2.3.3.1.200.1.81
wlsxTrapObjectsGroup 81
Aruba Instant 6.2.1.0-3.3 | MIB Reference Guide
Table 10 aiTraps Objects Group OIDs (Continued)
Object Object ID
wlsxTrapLocaIIp wlsxTrapMasterName wlsxTrapLocalName wlsxTrapPrimaryControllerIp
1.3.6.1.4.1.14823.2.3.3.1.200.1.83
1.3.6.1.4.1.14823.2.3.3.1.200.1.84
1.3.6.1.4.1.14823.2.3.3.1.200.1.85
wlsxTrapObjectsGroup 83 wlsxTrapObjectsGroup 84 wlsxTrapObjectsGroup 85
wlsxTrapApMasterStatus wlsxTrapCaName wlsxTrapCrlName wlsxTrapCount
1.3.6.1.4.1.14823.2.3.3.1.200.1.87
wlsxTrapObjectsGroup 87
1.3.6.1.4.1.14823.2.3.3.1.200.1.89
wlsxTrapObjectsGroup 89
1.3.6.1.4.1.14823.2.3.3.1.200.1.90
wlsxTrapObjectsGroup 90
1.3.6.1.4.1.14823.2.3.3.1.200.1.91
1.3.6.1.4.1.14823.2.3.3.1.200.1.92
wlsxTrapObjectsGroup 91 wlsxTrapObjectsGroup 92
1.3.6.1.4.1.14823.2.3.3.1.200.1.93
wlsxTrapObjectsGroup 93
1.3.6.1.4.1.14823.2.3.3.1.200.1.94
wlsxTrapObjectsGroup 94
1.3.6.1.4.1.14823.2.3.3.1.200.1.95
1.3.6.1.4.1.14823.2.3.3.1.200.1.96
wlsxTrapObjectsGroup 95 wlsxTrapObjectsGroup 96
1.3.6.1.4.1.14823.2.3.3.1.200.1.97
wlsxTrapObjectsGroup 97
1.3.6.1.4.1.14823.2.3.3.1.200.1.98
wlsxTrapObjectsGroup 98
1.3.6.1.4.1.14823.2.3.3.1.200.1.99
1.3.6.1.4.1.14823.2.3.3.1.200.1.100
wlsxTrapObjectsGroup 99 wlsxTrapObjectsGroup 100
1.3.6.1.4.1.14823.2.3.3.1.200.1.101
wlsxTrapObjectsGroup 101
1.3.6.1.4.1.14823.2.3.3.1.200.1.102
wlsxTrapObjectsGroup 102
1.3.6.1.4.1.14823.2.3.3.1.200.1.103
1.3.6.1.4.1.14823.2.3.3.1.200.1.104
wlsxTrapObjectsGroup 103 wlsxTrapObjectsGroup 104
1.3.6.1.4.1.14823.2.3.3.1.200.1.105
wlsxTrapObjectsGroup 105
1.3.6.1.4.1.14823.2.3.3.1.200.1.106
wlsxTrapObjectsGroup 106
1.3.6.1.4.1.14823.2.3.3.1.200.1.107
1.3.6.1.4.1.14823.2.3.3.1.200.1.108
wlsxTrapObjectsGroup 107 wlsxTrapObjectsGroup 108
1.3.6.1.4.1.14823.2.3.3.1.200.1.130
wlsxTrapObjectsGroup 130
wlsxTrapAPPreviousUplinkActiveTime
1.3.6.1.4.1.14823.2.3.3.1.200.1.131
wlsxTrapObjectsGroup 131
Aruba Instant 6.2.1.0-3.3 | MIB Reference Guide Traps |
65
66
| Traps
Table 10 aiTraps Objects Group OIDs (Continued)
Object Object ID
wlsxTrapAPActiveUplinkType wlsxTrapAPUplinkChangeReason
1.3.6.1.4.1.14823.2.3.3.1.200.1.132
wlsxTrapObjectsGroup 132
1.3.6.1.4.1.14823.2.3.3.1.200.1.133
wlsxTrapObjectsGroup 133
wlsxTrapAPMacAddress
Syntax
Max-Access
Status
Description
MacAddress accessible-for-notify current
This object is used in the traps to indicate the wired MAC address of an access point, for which the trap is being raised.
wlsxTrapAPIpAddress
Syntax
Max-Access
Status
Description
IpAddress accessible-for-notify current
This object is used in the traps to indicate the IP address of an access point for which for which the trap is being raised.
wlsxTrapAPBSSID
Syntax
Max-Access
Status
Description
MacAddress accessible-for-notify current
This object is used in the traps to indicate the BSSID of the access point for which we are raising the trap.
wlsxTrapEssid
Syntax
Max-Access
Status
Description
DisplayString(Size(0..64)) accessible-for-notify current
This object is used in the traps to indicate the SSID of the access point, for which the trap is being raised.
Aruba Instant 6.2.1.0-3.3 | MIB Reference Guide
wlsxTrapTargetAPBSSID
Syntax
Max-Access
Status
Description
MacAddress accessible-for-notify current
This object is used in the traps to indicate the BSSID of the access point, for which we are raising the trap. If an Air Monitor is sending the trap then this will indicate
AP. If an access point is sending the trap, then it will point to itself.
wlsxTrapTargetAPSSID
Syntax
Max-Access
Status
Description
DisplayString(Size(0..64)) accessible-for-notify current
This object is used in the traps to indicate the SSID of the access point, for which the trap is being raised. If an Air Monitor is sending the trap then this will indicate
AP. If an access point is sending the trap, then it will point to itself.
wlsxTrapTargetAPChannel
Syntax
Max-Access
Status
Description
Integer32 accessible-for-notify current
This object is used in the traps to indicate the channel of the access point, for which the trap is being raised. If an wlsxr monitor is sending the trap then this will indicate AP. If an access point is sending the trap, then it will point to itself.
wlsxTrapNodeMac
Syntax
Max-Access
Status
Description
MacAddress accessible-for-notify current
This object is used in the traps to indicate the MAC address of a node.
wlsxTrapSourceMac
Syntax
Max-Access
Status
Description
MacAddress accessible-for-notify current
This object is used in the traps to indicate the MAC address of the source.
Aruba Instant 6.2.1.0-3.3 | MIB Reference Guide Traps |
67
68
| Traps
wlsxReceiverMac
Syntax
Max-Access
Status
Description
MacAddress accessible-for-notify current
This object is used in the traps to indicate the MAC address of the receiver.
wlsxTrapTransmitterMac
Syntax
Max-Access
Status
Description
MacAddress accessible-for-notify current
This object is used in the traps to indicate the MAC address of the transmitter.
wlsxTrapReceiverMac
Syntax
Max-Access
Status
Description
MacAddress accessible-for-notify current
This object is used in the traps to indicate the MAC address of the receiver.
wlsxTrapSnr
Syntax
Max-Access
Status
Description
Integer32 accessible-for-notify current
This object is used in the traps to indicate the signal-to-noise ratio.
wlsxTrapSignatureName
Syntax
Max-Access
Status
Description
DisplayString(Size(0..64)) accessible-for-notify current
This object is used in the traps to indicate the signature name.
wlsxTrapFrameType
Syntax
Max-Access
Status
Description
ArubaFrameType accessible-for-notify current
This object is used in the traps to indicate the frame type.
Aruba Instant 6.2.1.0-3.3 | MIB Reference Guide
wlsxTrapAddressType
Syntax
Max-Access
Status
Description
ArubaAddressType accessible-for-notify current
This object is used in the traps to indicate the address type.
wlsxTrapAPLocation
Syntax
Max-Access
Status
Description
DisplayString(Size(0..64)) accessible-for-notify current
This object is used in the traps to indicate the location of the AP.
wlsxTrapAPChannel
Syntax
Max-Access
Status
Description
Integer32 accessible-for-notify current
This object is used in the traps to indicate the current channel.
wlsxTrapAPTxPower
Syntax
Max-Access
Status
Description
Integer32 accessible-for-notify current
This object is used in the traps to indicate the AP transmit power.
wlsxTrapMatchedMac
Syntax
Max-Access
Status
Description
MacAddress accessible-for-notify current
This object is used in the traps to indicate the MAC address.
wlsxTrapMatchedIp
Syntax
Max-Access
Status
Description
IpAddress accessible-for-notify current
This object is used in the traps to indicate the IP address.
Aruba Instant 6.2.1.0-3.3 | MIB Reference Guide Traps |
69
70
| Traps
wlsxTrapRogueIfoURL
Syntax
Max-Access
Status
Description
DisplayString(Size(0..64)) accessible-for-notify current
This object is used to point to the WEBUI Rogue AP information URL.
wlsxTrapVLANId
Syntax
Max-Access
Status
Description
Integer32 accessible-for-notify current
This object is used in the traps to indicate the VLAN ID.
wlsxTrapAdminStatus
Syntax
Max-Access
Status
Description
ArubaEnableValue (INTEGER) accessible-for-notify current
This object is used in the traps to indicate the admin status of VLAN.
wlsxTrapOperStatus
Syntax
Max-Access
Status
Description
ArubaOperStateValue accessible-for-notify current
This object is used in the traps to indicate the admin status of VLAN.
wlsxTrapAuthServerName
Syntax
Max-Access
Status
Description
DisplayString(Size(0..64)) accessible-for-notify current
This object is used in the traps to indicate the authentication server used for authentication.
wlsxTrapAuthServerTimeout
Syntax
Max-Access
Status
Description
Integer32 accessible-for-notify current
This object is used in the traps to indicate the Authentication Server Timeout.
Aruba Instant 6.2.1.0-3.3 | MIB Reference Guide
wlsxTrapCardSlot
Syntax
Max-Access
Status
Description
Integer32 accessible-for-notify current
This object is used in the traps to indicate the slot in which this card is present.
wlsxTrapTemperatureValue
Syntax
Max-Access
Status
Description
DisplayString(Size(0..64)) accessible-for-notify current
This object is used in the traps to indicate the temperature value.
wlsxTrapProcessName
Syntax
Max-Access
Status
Description
DisplayString(Size(0..64)) accessible-for-notify current
This object is used in the traps to indicate the process name.
wlsxTrapFanNumber
Syntax
Max-Access
Status
Description
Integer32 accessible-for-notify current
This object is used in the traps to indicate the fan number.
wlsxTrapVoltageType
Syntax
Max-Access
Status
Description
DisplayString(Size(0..64)) accessible-for-notify current
This object is used in the traps to indicate the type of voltage.
wlsxTrapVoltageValue
Syntax
Max-Access
Status
Description
DisplayString(Size(0..64)) accessible-for-notify current
This object is used in the traps to indicate the voltage value in float.
Aruba Instant 6.2.1.0-3.3 | MIB Reference Guide Traps |
71
72
| Traps
wlsxTrapStationBlackListReason
Syntax
Max-Access
Status
Description
ArubaBlackListReason accessible-for-notify current
The reason for which a station is black listed.
wlsxTrapSpoofedIpAddress
Syntax
Max-Access
Status
Description
IpAddress accessible-for-notify current
This object is used in a trap to identify a spoofed IP address.
wlsxTrapSpoofedOldPhyAddress
Syntax
Max-Access
Status
Description
MacAddress accessible-for-notify current
This object is used in a trap to identify an old MAC address.
wlsxTrapSpoofedNewPhyAddress
Syntax
Max-Access
Status
Description
MacAddress accessible-for-notify current
This object is used in a trap to identify a new MAC address.
wlsxTrapDBName
Syntax
Max-Access
Status
Description
DisplayString(Size(0..64)) accessible-for-notify current
This object is used in a trap to identify the name of the database.
wlsxTrapDBUserName
Syntax
Max-Access
Status
Description
DisplayString(Size(0..64)) accessible-for-notify current
This object is used in a trap to identify the name of the database user.
Aruba Instant 6.2.1.0-3.3 | MIB Reference Guide
wlsxTrapDBIpAddress
Syntax
Max-Access
Status
Description
DisplayString(Size(0..64)) accessible-for-notify current
This object is used in a trap to identify the IP address of the database.
wlsxTrapDBType
Syntax
Max-Access
Status
Description
ArubaDBType accessible-for-notify current
This object is used in a trap to identify the port of the user.
wlsxTrapVrrpID
Syntax
Max-Access
Status
Description
Integer32 accessible-for-notify current
This object contains the virtual router identifier.
wlsxTrapVrrpMasterIp
Syntax
Max-Access
Status
Description
IpAddress accessible-for-notify current
This object contains the master IP address.
wlsxTrapVrrpOperState
Syntax
Max-Access
Status
Description
ArubaVrrpState accessible-for-notify current
This object represents the VRRP operational state.
wlsxTrapESIServerGrpName
Syntax
Max-Access
Status
Description
DisplayString(Size(0..64)) accessible-for-notify current
This object represents the External Services Interface (ESI) server group name.
Aruba Instant 6.2.1.0-3.3 | MIB Reference Guide Traps |
73
74
| Traps
wlsxTrapESIServerName
Syntax
Max-Access
Status
Description
DisplayString(Size(0..64)) accessible-for-notify current
This object represents the External Services Interface (ESI) server name.
wlsxTrapESIServerIpAddress
Syntax
Max-Access
Status
Description
IpAddress accessible-for-notify current
This object represents the External Services Interface (ESI) server IP address.
wlsxTrapLicenseDaysRemaining
Syntax
Max-Access
Status
Description
Integer32 accessible-for-notify current
This object represents the number of days remaining prior to a license expiry.
wlsxTrapSwitchIp
Syntax
Max-Access
Status
Description
IpAddress accessible-for-notify current
This object represents the controller IP address.
wlsxTrapSwitchRole
Syntax
Max-Access
Status
Description
ArubaSwitchRole accessible-for-notify current
This object represents the role of the controller.
wlsxTrapUserIpAddress
Syntax
Max-Access
Status
Description
IpAddress accessible-for-notify current
This object represents the IP address of the user.
Aruba Instant 6.2.1.0-3.3 | MIB Reference Guide
wlsxTrapUserPhyAddress
Syntax
Max-Access
Status
Description
MacAddress accessible-for-notify current
This object represents the MAC address of the user.
wlsxTrapUserName
Syntax
Max-Access
Status
Description
DisplayString(Size(0..64)) accessible-for-notify current
This object represents the user name.
wlsxTrapUserRole
Syntax
Max-Access
Status
Description
DisplayString(Size(0..64)) accessible-for-notify current
This object represents the Authentication method of the user.
wlsxTrapUserAuthenticationMethod
Syntax
Max-Access
Status
Description
ArubaAuthenticationMethods accessible-for-notify current
This object represents the Authentication method of the user.
wlsxTrapAPRadioNumber
Syntax
Max-Access
Status
Description
Integer32 accessible-for-notify current
This object represents the radio number.
wlsxTrapRogueInfoURL
Syntax
Max-Access
Status
Description
DisplayString(Size(0..64)) accessible-for-notify current
This object is used to point to the WEBGUI Rogue AP information URL.
Aruba Instant 6.2.1.0-3.3 | MIB Reference Guide Traps |
75
76
| Traps
wlsxTrapInterferingAPInfoURL
Syntax
Max-Access
Status
Description
DisplayString(Size(0..64)) accessible-for-notify current
This object is used to point to the WEBGUI Rogue interfering access point information URL.
wlsxTrapPortNumber
Syntax
Max-Access
Status
Description
Integer32 accessible-for-notify current
This object is used in the traps to indicate the port number.
wlsxTrapTime
Syntax
Max-Access
Status
Description
DateAndTime accessible-for-notify current
This object is used in all the enterprise traps to indicate the time when the trap is generated on the controller.
wlsxTrapHostIp
Syntax
Max-Access
Status
Description
IpAddress accessible-for-notify current
This object represents the trap host.
wlsxTrapHostPort
Syntax
Max-Access
Status
Description
Integer32 accessible-for-notify current
This object represents the trap host port.
wlsxTrapConfigurationId
Syntax
Max-Access
Status
Description
Integer32 accessible-for-notify current
This object represents the ID of the configuration, to be used in traps.
Aruba Instant 6.2.1.0-3.3 | MIB Reference Guide
wlsxTrapCTSURL
Syntax
Max-Access
Status
Description
DisplayString(Size(0..64)) accessible-for-notify current
This object represents the URL from which the transfer should happen.
wlsxTrapCTSTransferType
Syntax
Max-Access
Status
Description
DisplayString(Size(0..64)) accessible-for-notify current
This object represents the transfer type, upload or download.
wlsxTrapConfigurationState
Syntax
Max-Access
Status
Description
ArubaConfigurationState (INTEGER) accessible-for-notify current
This object represents the state of the configuration transfer.
wlsxTrapUpdateFailureReason
Syntax
Max-Access
Status
Description
DisplayString(Size(0..64)) accessible-for-notify current
This object represents the reason for the update failure.
wlsxTrapUpdateFailedObj
Syntax
Max-Access
Status
Description
History
DisplayString(Size(0..64)) accessible-for-notify current
This variable represents the AMAPI object which is the reason for the update failure.
Added in ArubaOS 3.1.0.0.
wlsxTrapTableEntryChangeType
Syntax
Max-Access
Status
Description
ArubaConfigurationChangeType (INTEGER) accessible-for-notify current
This object represents the type of the configuration change.
Aruba Instant 6.2.1.0-3.3 | MIB Reference Guide Traps |
77
78
| Traps
wlsxTrapGlobalConfigObj
Syntax
Max-Access
Status
Description
DisplayString(Size(0..64)) accessible-for-notify current
This variable represents the AMAPI object corresponding to the global configuration change.
wlsxTrapTableGenNumber
Syntax
Max-Access
Status
Description
Integer32 accessible-for-notify current
This object represents the generation number of a table. Used in the MMS to keep track of the table content changes.
wlsxTrapLicenseId
Syntax
Max-Access
Status
Description
Integer32 accessible-for-notify current
This object is used in the traps to indicate the license ID.
wlsxTrapConfidenceLevel
Syntax
Max-Access
Status
Description
Integer32 accessible-for-notify current
This object is used in the traps to indicate the confidence level as a percentage.
wlsxTrapMissingLicenses
Syntax
Max-Access
Status
Description
DisplayString(Size(0..64)) accessible-for-notify current
This variable indicates any licenses that are not present during a configuration update.
Aruba Instant 6.2.1.0-3.3 | MIB Reference Guide
wlsxVoiceCurrentNumCdr
Syntax
Max-Access
Status
Description
History
Integer32 accessible-for-notify current
This object represents the number of CDRs in buffer.
Added in ArubaOS 3.1.0.0.
wlsxTrapTunnelId
Syntax
Max-Access
Status
Description
Integer32 accessible-for-notify current
This object represents the tunnel ID.
wlsxTrapTunnelStatus
Syntax
Max-Access
Status
Description
Integer32 accessible-for-notify current
This object represents the tunnel status.
wlsxTrapTunnelUpReason
Syntax
Max-Access
Status
Description
DisplayString(Size(0..64)) accessible-for-notify current
This object represents the tunnel up reason.
wlsxTrapTunnelDownReason
Syntax
Max-Access
Status
Description
DisplayString(Size(0..64)) accessible-for-notify current
This object represents the tunnel down reason.
wlsxTrapApSerialNumber
Syntax
Max-Access
Status
Description
DisplayString(Size(0..64)) accessible-for-notify current
This object represents the AP serial number.
Aruba Instant 6.2.1.0-3.3 | MIB Reference Guide Traps |
79
80
| Traps
wlsxTraptimeStr
Syntax
Max-Access
Status
Description
DisplayString(Size(0..64)) accessible-for-notify current
This object represents the Time in String format.
wlsxTrapMasterIp
Syntax
Max-Access
Status
Description
IpAddress accessible-for-notify current
This object represents the master IP address.
wlsxTrapLocaIIp
Syntax
Max-Access
Status
Description
IpAddress accessible-for-notify current
This object represents the local IP address.
wlsxTrapMasterName
Syntax
Max-Access
Status
Description
History
DisplayString(Size(0..64)) accessible-for-notify current
This object represents the master controller name.
Added in ArubaOS 3.4.1
wlsxTrapLocalName
Syntax
Max-Access
Status
Description
DisplayString(Size(0..64)) accessible-for-notify current
This object represents the local controller name.
wlsxTrapPrimaryControllerIp
Syntax
Max-Access
Status
Description
IpAddress accessible-for-notify current
This object represents the IP address of the AP's primary controller.
Aruba Instant 6.2.1.0-3.3 | MIB Reference Guide
wlsxTrapBackupControllerIp
Syntax
Max-Access
Status
Description
IpAddress accessible-for-notify current
This object represents the IP address of the AP's backup controller.
wlsxTrapSpoofedFrameType
Syntax
Max-Access
Status
Description
DisplayString (SIZE(0..64)) accessible-for-notify current
This object is used in the traps to indicate the Spoofed Frame Type
wlsxTrapAssociationType
Syntax
Max-Access
Status
Description
DisplayString (SIZE(0..64)) accessible-for-notify current
This object is used in the traps to indicate the type of association.
wlsxTrapDeviceIpAddress
Syntax
Max-Access
Status
Description
IpAddress accessible-for-notify current
This object represents the IP address of a device seen by an AP.
wlsxTrapDeviceMac
Syntax
Max-Access
Status
Description
MacAddress accessible-for-notify current
This object represents the MAC address of a device seen by an AP.
wlsxTrapVcIpAddress
Syntax
Max-Access
Status
Description
IpAddress accessible-for-notify current
This object represents the IP Address of a Voice client.
Aruba Instant 6.2.1.0-3.3 | MIB Reference Guide Traps |
81
82
| Traps
wlsxTrapVcMacAddress
Syntax
Max-Access
Status
Description
MacAddress accessible-for-notify current
This object represents the MAC address of a Voice client.
wlsxTrapAPName
Syntax
Max-Access
Status
Description
DisplayString (SIZE(0..64)) accessible-for-notify current
This object is used in the traps to indicate the Name of the AP.
wlsxTrapApMode
Syntax
Max-Access
Status
Description
Integer32 accessible-for-notify current
This Object represents the AP Mode.
wlsxTrapAPPrevChannel
Syntax
Max-Access
Status
Description
Integer32 accessible-for-notify current
This object is used in the traps to indicate the Previous Channel.
wlsxTrapAPPrevChannelSec
Syntax
Max-Access
Status
Description
ArubaHTExtChannel (INTEGER) accessible-for-notify current
This object is used in the traps to indicate the Previous Secondary Channel.
wlsxTrapAPPrevTxPower
Syntax
Max-Access
Status
Description
Integer32 accessible-for-notify current
This object is used in the traps to indicate previous AP Transmit Power.
Aruba Instant 6.2.1.0-3.3 | MIB Reference Guide
wlsxTrapAPCurMode
Syntax
Max-Access
Status
Description
ArubaAccessPointMode (INTEGER) accessible-for-notify current
This Object represents the APs Current Mode.
wlsxTrapAPPrevMode
Syntax
Max-Access
Status
Description
ArubaAccessPointMode (INTEGER) accessible-for-notify current
This Object represents the APs Previous Mode.
wlsxTrapAPARMChangeReason
Syntax
Max-Access
Status
Description
ArubaARMChangeReason (INTEGER) accessible-for-notify current
This Object represents the APs Previous Mode.
wlsxTrapAPChannelSec
Syntax
Max-Access
Status
Description
ArubaHTExtChannel (INTEGER) accessible-for-notify current
This object is used in the traps to indicate the Current Secondary Channel.
wlsxTrapUserAttributeChangeType
Syntax
Max-Access
Status
Description
ArubaConfigurationChangeType (INTEGER) accessible-for-notify current
This object represents type of the configuration change.
wlsxTrapAPControllerIp
Syntax
Max-Access
Status
Description
IpAddress accessible-for-notify current
IP address of the controller to which the AP is (or was most recently) registered.
Aruba Instant 6.2.1.0-3.3 | MIB Reference Guide Traps |
83
84
| Traps
wlsxTrapApMasterStatus
Syntax
Max-Access
Status
Description
ArubaAPMasterStatus (INTEGER) accessible-for-notify current
Status of the AP as seen by the master when the status changes.
wlsxTrapCaName
Syntax
Max-Access
Status
Description
DisplayString (SIZE(0..64)) accessible-for-notify current
This object is used in the traps to indicate the name of the trustpoint.
wlsxTrapCrlName
Syntax
Max-Access
Status
Description
DisplayString (SIZE(0..64)) accessible-for-notify current
This object is used in the traps to indicate the name of the CRL.
wlsxTrapCount
Syntax
Max-Access
Status
Description
Integer32 accessible-for-notify current
This object represents the number of occurrence of this trap.
Aruba Instant 6.2.1.0-3.3 | MIB Reference Guide
wlsxTrapAPPreviousUplinkType
Syntax
Max-Access
Status
Description
ArubaAPUplinkType accessible-for-notify current
This object represents the previous uplink type of an AP.
wlsxTrapAPPreviousUplinkActiveTime
Syntax
Max-Access
Status
Description
TimeTicks accessible-for-notify current
This object represents the active time of the previous uplink of an AP.
wlsxTrapAPActiveUplinkType
Syntax
Max-Access
Status
Description
ArubaAPUplinkType accessible-for-notify current
This object represents the active uplink type of an AP.
wlsxTrapAPUplinkChangeReason
Syntax
Max-Access
Status
Description
ArubaAPUplinkChangeReason accessible-for-notify current
This object represents the uplink change reason.
Aruba Instant 6.2.1.0-3.3 | MIB Reference Guide Traps |
85
Advertisement