advertisement
Intel® Solid-State Drive Pro 2500 Series (M.2)
2.4 Environmental Conditions
2.4.1 Temperature, Shock, Vibration
Table 8: Temperature, Shock, Vibration
Electrical Characteristics
Module Temperature
Operating 1
Non-operating 2
Temperature Gradient 3
Operating
Non-operating
Humidity
Operating
Non-operating
Shock and Vibration
Shock 4
Operating
Non-operating
Vibration 5
Operating
Non-operating
2.13
Note:
1.
2.
3.
4.
5.
Range
0° C – 70° C
-55° C – 95° C
30 (TYP)° C/hr
30 (TYP)° C/hr
5 – 95 %
5 – 95 %
1,000 G (Max) at 0.5 msec
1,000 G (Max) at 0.5 msec
2.17 GRMS (5-700 Hz) Max
3.13 GRMS (5-800 Hz) Max
Range
As measured by temperature sensor, SMART Attribute BEh. Active airflow is recommended within the system for maintaining proper device operating temperature on heavier workloads.
Please contact your Intel representative for details on the non-operating temperature range.
Temperature gradient measured without condensation.
Shock specifications assume SSD is mounted securely with the input vibration applied to the drive-mounting screws. Stimulus may be applied in the X, Y or Z axis. Shock specification is measured using peak acceleration and pulse width value.
Vibration specifications assume the SSD is mounted securely with the input vibration applied to the drive-mounting screws. Stimulus may be applied in the X, Y or Z axis. Vibration specification is measured using G Root Mean
Squared (GRMS) value.
2.13.1 Altitude
The drive is not sensitive to changes in atmospheric pressure because it has no moving parts. Drive tested under non-operational conditions to pressures representative of -1 K and +40 K feet.
Product Specification
10
October 2016
330902-003
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 5 Introduction
- 6 Revision History
- 6 Terminology
- 7 Reference Documents
- 8 Product Specifications
- 8 Capacity
- 8 Performance
- 9 Electrical Characteristics
- 10 Environmental Conditions
- 10 Temperature, Shock, Vibration
- 10 Altitude
- 11 Product Regulatory Compliance
- 12 Reliability
- 13 Mechanical Information
- 16 Pin and Signal Descriptions
- 16 Pin Locations
- 17 Signal Descriptions
- 18 Device Sleep Feature
- 19 Supported Command and Feature Sets
- 19 Supported ATA General Feature Command Set
- 21 Advanced Power Management (APM)
- 22 Security
- 22 Sanitization Methods
- 22 TCG Opal SSC Support
- 23 Windows eDrive
- 23 Device Statistics
- 24 Software Settings Preservation
- 24 DevSleep
- 25 SMART Command Transport
- 25 SMART Attributes
- 28 SMART Logs
- 29 Certifications and Declarations
- 30 Appendix
- 30 Identify Device
- 34 Models