advertisement
GSM-VAC4+ INSTALLATION MANUAL
11.8
EVENT LOG PARAMETERS
GSM-VAC4+ has a small set of parameters to manage log memory.
11.8.1
LOGN parameter
LOGN parameter is used to define the number of log events that will be send out in case of PLOG command
11.8.2
LOGI parameter
LOGN parameter is used to enable and define GSM-VAC4+ log storage.
⇒ LOGI=0 Logging is OFF
⇒ LOGI=1 Logging in internal memory
⇒ LOGI=2 Logging to USB interface
11.8.3
ALC parameter
ALC parameter defines an action in case when the LOG memory is FULL
⇒ ALC=0 Automatically delete buffer when memory is FULL
⇒ ALC=1 Memory buffer must be deleted manually when it is FULL
Table of parameters:
Name
LOGI
LOGN
ALC
Comment
Log storage
Number of log events for print
Control for memory handling in case memory storage is full
Table 33: LOG parameters
Example:
♦
Direct programming on the SIM card
Name
LOGI
LOGN
ALC
GSM-VAC4+ PROGRAMMING TABLE
SIM CARD PHONE BOOK
Number
1
10
1
Description
Use internal GSM-VAC4+ storage
Send 10 events in case of PLOG request
Automatically delete memory buffer when is full
Table 34: LOG parameters example
♦
Remote programming by SMS
;LOGI=1;LOGN=10;ALC=1;
35
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 8 FOR YOUR SAFETY
- 9 INTRODUCTION
- 10 FEATURES AND APPLICATIONS
- 11 START UP
- 13 CLEAR ALL PROGRAMMED DATA FROM SIM
- 14 CONNECTING DIAGRAM
- 15 DESCRIPTION OF TERMINAL BLOCKS
- 16 PROGRAMMING OPTIONS
- 17 VOICE MESSAGES – RECORD & PLAY
- 17 RECORDING / LISTENING OF VOICE ALARM MESSAGES
- 18 GSM-VAC4+ PARAMETERS
- 18 SECURITY LEVEL
- 19 ALARM SUPPORT
- 30 ADVANCED CLIP FUNCTION
- 31 CLIP FUNCTION
- 33 PREPAID CARD CREDIT AND VALIDITY INFORMATION
- 35 SET-UP PARAMETERS
- 40 CONTACT ID EVENT REPORTING
- 41 EVENT LOG PARAMETERS
- 42 PRINT-OUT OF THE PARAMETERS
- 42 RECEIVE ALL PARAMETERS (PALL)
- 42 RECEIVE TELEPHONE NUMBERS (PTN)
- 42 RECEIVE LINKS (PLN)
- 42 RECEIVE INPUT PARAMETERS (PIN)
- 42 RECEIVE INPUT FILTER VALUE (PID)
- 42 RECEIVE DELAY BEFORE DIAL VALUE (PDD)
- 42 RECEIVE INPUT FILTER PARAMETERS (PIF)
- 42 RECEIVE CREDIT CHECK NUMBERS (PCN)
- 43 RECEIVE CREDIT CHECK PARSE STRING PARAM. (PCREF)
- 43 RECEIVE CREDIT STATUS FOR CC1 (PCC1)
- 43 RECEIVE CREDIT STATUS FOR CC2 (PCC2)
- 43 RECEIVE CREDIT STATUS FOR CC3 (PCC3)
- 43 RECEIVE CLIP IDENTIFICATION FUNCTIONS (PTC)
- 43 RECEIVE ACCESS TELEPHONE NUMBERS (PSL)