Setting Up Your PC. Gigabyte GB-AEBN

Add to My manuals
32 Pages

advertisement

Setting Up Your PC. Gigabyte GB-AEBN | Manualzz

Setting Up Your PC

This section describes how to set up your computer and make adjustments to the monitor.

Preparing To Setup Your PC

Before attempting to set up your computer, to protect the computer and monitor, you should:

• find a flat open area on your desk to position your computer.

• place a soft item like the computer packaging bag on the desk for padding.

It is suggested to install your computer in a space that allows for airflow as restricting the airflow may cause overheating which could impact the performance of your computer.

1. Gently lay the screen face down on a flat clean padded surface.

2. Pull the computer stand till it reaches the first detent stop. (approximately 10° apart from the rear of the computer).

Please ensure that the computer stand has been pulled up to the first detent position, so that your computer may stand firm and upright.

3. Carefully lift the computer and adjust the angle of the screen.

GB-AEBN 10

Non-Touch Screen

Please ensure that the computer stand has been pulled up to the first detent position, so that your computer may stand firm and upright.

Now you are ready to access some ports on the rear panel of the computer to make cable connections.

GB-AEBN 11

advertisement

Related manuals