VAIO MicroTower System Reference

Add to my manuals
114 Pages


VAIO MicroTower System Reference | Manualzz

Chapter 7 i.LINK Card

The i.LINK (IEEE-1394) card provides 6-pin i.LINK (IEEE-1394) connectors to devices that are also equipped with 6-pin i.LINK (IEEE-

1394) connectors. The i.LINK (IEEE-1394) card occupies PCI slot #2.

The two 6-pin i.LINK (IEEE-1394) connectors on the card bracket are accessible from the back of the computer. Each 6-pin connector can supply power from the computer to a connected device if that device also has a 6-i.LINK (IEEE-1394) connector. Each connector supplies 10V to 12V.

The total power supplied by both connectors cannot exceed 6 watts.

A cable connects the 8-pin header connector (CN5) on the i.LINK

(IEEE-1394) card to an interface unit mounted behind the front panel cover. The interface unit provides the 4-pin i.LINK (IEEE-1394) connector at the bottom right side of the front chassis. A power supply cable connects to the 4-pin header connector (CN10).

To 4-pin i.LINK connector on front chassis i.LINK

(IEEE-1394) i.LINK



CN10 to power supply (+12V)




VAIO MicroTower System Reference






Connector Type

6-pin i.LINK


8-pin header

CN10 4-pin header connector


Connects to a device equipped with a

6-pin i.LINK connector

Connects to an internally-mounted interface device that provides the 4pin i.LINK (IEEE-1394) connector that is accessible on the front right side of the chassis

Connects to power supply cable


Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF


Table of contents