IntelliVue Patient Monitor

Add to my manuals
414 Pages

advertisement

IntelliVue Patient Monitor | Manualzz

2

2

What’s New?

This section lists the most important new features and improvements to the monitor and its user interface introduced with each release. Further information is provided in other sections of this book.

You may not have all of these features, depending on the monitor configuration purchased by your hospital.

What’s New in Release D.0?

M1014A Spirometry Module

The spirometry module produces a real time wave for flow, volume and pressure of respiratory gases together with numerics for analysis of ventilatory mechanics. It is designed to be used in combination with Philips-branded airway flow sensors and combined CO

2

/airway flow sensors.

M3014A Capnography Extension

The M3014A Capnography Extension offers an additional measurement method - sidestream CO

2 with the M2741A sensor.

M8016A D80 Intelligent Display

The D80 Intelligent Display can be used as a third main display with the MP90 monitor. You then have three displays able to be configured individually and to be operated independently.

IntelliVue 802.11 Bedside Adapter

The 802.11 Bedside Adapter is a wireless ethernet adapter which can be built in to the patient monitor

(option J35). It provides wireless connectivity to standard IEEE 802.11a/b/g wireless networks.

Improved Multiple Display Support

• Wide and Tall screen layouts are supported which allow screen content to be spread over two screens next to each other (wide acreen) or one above the other (tall screen).

• An additional main display used for a surgeon can be configured not to show alarm information.

The permanent keys and SmartKeys can also be configured not to display.

• Input devices can be assigned to an operator, independent of physical connector location.

New SmartKeys

For the new spirometry module there is a SmartKey to provide direct access to the spirometry data window. For microstream and sidestream CO

2

SmartKey

CO2 Pump Off

.

, sampling can now be suppressed directly with the

35

2 What’s New?

What’s New in Release C.0?

What’s New in Release C.0?

IntelliVue MP80

The MP80 patient monitor is a new addition to the IntelliVue patient monitor family. The functionality is similar to that of the MP70 but with the flexibility of component modularity as in the

MP90.

M3014A Capnography Extension

The M3014A Capnography Extension offers a new measurement combination - mainstream CO

2 cardiac output, invasive pressure and invasive pressure/temperature.

,

M8045A Docking Station

The docking station provides quick mounting and connections for the MP20/MP30/MP40/MP50 in a one-step operation. By placing the monitor on the docking station and closing the lever you can make the connection to AC power and to a network, if present.

BIS Interface Board

This interface board allows use of Bispectral Index monitoring with the MP20 and MP30.

Timers Application

The new Timers application allows you to set timers to notify you when a specific time period has expired. The timers can have varying characteristics and can be located on the Main screen for easy viewing.

IntelliVue Instrument Telemetry (USA only)

Wireless network capabilities via the IntelliVue Instrument Telemetry network using a built-in interface (MP20/MP30) or an external adapter (MP40/MP50).

Remote Applications

Remote applications can now be embedded in a monitoring Screen. The display colors for remote applications have been enhanced.

Basic Operation

• Selection and order of SmartKeys can now be configured in the monitor’s Configuration mode.

• A new SmartKey exits Standby mode at the gas monitor.

• Direct operation of a second independent display with the MP90, using standard input devices.

• Networked monitors can now show Telemetry information for the “Own Bed” in an overview window or embedded in a Screen.

• Overview bed information can be configured to display in the colors used at the Information Center

(with Information Center System G or higher).

• Support for Unit-based Care Group model for up to 64 beds (with Information Center System G or higher).

• Battery status information on the main screen now includes estimated monitoring time available during battery charging.

• Barcode reader support during patient admission.

• Direct entry to graphical trends when a limit alarm is selected in alarm review and to the event episode window when an event alarm is selected.

• MP90: screen trends can now also be viewed on the second display.

36

What’s New in Release B.1?

2 What’s New?

Trends

• In graphical trends, a segment menu allows direct adjustment of trend scales, automatic scale optimization, expanded view for an individual segment.

• In graphical and horizon Screen Trends a cursor is available.

• In the Vital Signs window, the values can be shown with the parameter color.

Events

• Events can be configured to be signaled as alarms (advanced event surveillance only).

• Deviation triggers can be set which trigger an event when measured values change by a defined amount over a set time (advanced event surveillance only).

• Up to six event groups can be active simultaneously (advanced event surveillance only).

Measurements

• Pulse Pressure Variation is a new derived measurement calculated from beat-to-beat arterial pressure values.

• MAC value calculations

Applications

• Improved Drug Calculator meeting JCAHO requirements.

• The ST Map application shows ST changes over time in two multi-axis spider diagrams.

• Freeze and measure waves on the Main Screen.

What’s New in Release B.1?

IntelliVue MP20/MP30

The MP20/MP30 patient monitor is a new addition to the IntelliVue patient monitor family. It is smaller and lighter than the MP40/MP50 monitors and can be powered by battery. It can be used with the measurement server and server extensions and has a built-in recorder.

Basic Operation

• New Measurement Selection window makes it easier to resolve measurement label conflicts

• New Previous/Next Screen function provides access to the ten most recently modified Screens

• Wave speeds can now be set for individual wave channels

Trends

• Cursor in graphical trend window improves navigation in the trends database

• Vital Signs and Graphical Trend screen elements can be embedded on a Screen

• New band style format for displaying trends of measurements with multiple numerics

• Horizon trend is a new format for screen trends, showing the deviation from a stored baseline

• Aperiodic measurements now stored with a timestamp in Vital Signs

• New symbol representing NBP measurements in Graphical Trends

Measurements

• ST numerics in the Alarm Limits window can be shown and hidden

37

2 What’s New?

What’s New in Release B.0?

• ST Point can be set directly by selecting a numeric value

• New NBP countdown timer shows the time remaining until the next NBP measurement in a series

• Networked monitors can now show Other Bed information embedded on Screen

• Additional labels available for Pressure and Temp

• Additional options for SpO

2

, support for an extended list of accessories

• Suppress Zero function for Microstream CO

2

Applications

• Drug Calculator can now be configured to include a list of commonly-used drugs

• Cursor in the Loops window improves navigation through the stored loops

• Volume-flow loops added to the list of respiratory loops types

• Loops Report for documentation of stored loops

• EEG CSA can now be called up and viewed in a window over the currently displayed Screen

What’s New in Release B.0?

IntelliVue MP40/MP50 The MP40/MP50 patient monitor is a new addition to the IntelliVue patient monitor family. It uses the same measurement devices as the MP60/MP70/MP90 monitors and shares the same technological platform and user interface, but is more compact in size and can be operated by battery.

M3012A Measurement Server Extension The new Hemodynamic Measurement Server Extension extends measurement capability by adding two additional pressures and Cardiac Output.

M1020B SpO

2

Module New SpO

2

measurement module, M1020B, enables dual SpO

2 measurement without the need to use the VueLink module. Two options are available:

– Option A01 for use with Philips reusable and disposable sensors and Nellcor “R-Cal” disposable sensors.

– Option A02 for use with Nellcor OxiMax sensors, including the MAX-FAST forehead sensor.

M1020B Option A02 for use with Nellcor OxiMax sensors may not be available in all countries.

PV Loops: compares graphic representations of airway waves to help detect changes in the patient airway condition.

High-resolution waves per Screen: the number of high-resolution waves that can be shown on a

Screen is increased, limited only by the Axx Option purchased.

Alarms symbols: New alarm symbols are introduced, and “short” yellow alarms were renamed “onestar” yellow alarms (yellow arrhythmia alarms).

Aperiodic measurements available as Screen Trends: patient trend information for NBP, C.O., C.I., and Wedge can now be permanently displayed on the Screen in tabular and graphical form.

38

What’s New in Release A.2?

2 What’s New?

What’s New in Release A.2?

12-Lead ECG recordings: 12-Lead ECG waves and numerics can be sent to a connected recorder

High-Resolution Trend Report: high-resolution trend report can be sent to a connected printer

ST Snippets ST snippets, showing a one second wave segment for each measured ST lead, can be permanently displayed on the Screen or called up as required.

EEG Wave Speed: new EEG-specific wave speeds have been added to the list of wave speeds available

Drug Calculator: this new feature helps you to calculate drug dosages for your patients

On-Screen Calculator: a mathematics calculator can be used on the Screen

Visitor Screen: this new Screen is designed to hide sensitive patient information from the Screen.

Monitoring and alarm generation function as usual.

Touch selection volume control: The volume of the audio prompt given when a screen element is selected is now adjustable

VueLink interface: the VueLink on-screen appearance and controls are improved

M3001A: Trend upload from the Multi-Measurement Server (M3001A) improved

Screen Trends: lets you display patient trend information in graphic form permanently on the Screen

Alarm Limits Page: lets you view and control alarm settings for all measurements in one window

New Option for Event Surveillance: a new neonatal event review option #C04 is introduced

Second display To simultaneously show two different Screens, a second display can be connected to the MP90. The second display is for viewing only.

39

2 What’s New?

What’s New in Release A.2?

40

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals