- Vehicles & accessories
- Motor vehicle electronics
- Car navigation systems
- Raymarine
- e140
- Installation Guide
advertisement
▼
Scroll to page 2
of 104
3.7 Alarm connection
An alarm buzzer can be connected using the power / data cable provided with the display.
Typical alarm connection
36
W idescreen display
19 way multi-cable
Grey Black
Power, data and video
Black
-ve supply
(from battery/
breaker)
Red Black
Alarm
D11216-2
Note: The alarm output is rated for 100 mA maximum load
E-Series Widescreen installation
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
Download PDF
advertisement
Table of contents
- 7 Chapter 1 Important information
- 8 TFT LCD Displays
- 8 Water ingress
- 9 Disclaimers
- 9 CompactFlash cards
- 9 EMC installation guidelines
- 10 Suppression ferrites
- 10 Connections to other equipment
- 10 Declaration of conformity
- 10 Product disposal
- 10 Warranty registration
- 11 IMO and SOLAS
- 11 Technical accuracy
- 13 Chapter 2 Planning the installation
- 14 2.1 Handbook information
- 14 2.2 Installation checklist
- 15 2.3 E-Series Widescreen system
- 17 2.4 System protocols
- 18 2.5 Data master
- 19 2.6 Pack contents
- 20 2.7 Tools
- 21 Chapter 3 Cables and connections
- 22 3.1 General cabling guidance
- 23 3.2 Connections overview
- 23 3.3 Power connection
- 26 network
- 34 3.5 NMEA 0183 connection
- 35 3.6 SeaTalk connection
- 36 3.7 Alarm connection
- 37 3.8 GPS connection
- 38 3.9 AIS connection
- 39 3.10 Fastheading connection
- 40 connections
- 41 3.12 NMEA 2000 connection
- 42 3.13 Video and alarm audio connection
- 45 Chapter 4 Location and mounting
- 46 4.1 Selecting a location
- 48 4.2 Flush mounting
- 49 4.3 Bracket (trunnion) mounting
- 51 4.4 Front bezel
- 53 Chapter 5 System checks
- 54 5.1 Initial power on test
- 55 5.2 Designating the data master
- 55 5.3 GPS check
- 55 5.4 Radar check
- 57 5.5 Sonar check
- 58 5.6 Language selection
- 58 5.7 Setting up Autopilot, AIS and Navtex
- 59 5.8 System setup menu
- 66 Chapter 6 Troubleshooting
- 67 6.1 Troubleshooting
- 68 6.2 Power up troubleshooting
- 69 6.3 Radar troubleshooting
- 70 6.4 GPS troubleshooting
- 71 6.5 Sonar troubleshooting
- 72 6.6 System data troubleshooting
- 73 6.7 Video troubleshooting
- 74 6.8 Touchscreen troubleshooting
- 74 LED indications
- 75 6.10 Miscellaneous troubleshooting
- 76 Chapter 7 Technical support
- 77 7.1 Raymarine technical support
- 78 7.2 3rd party support
- 80 Chapter 8 Technical specification
- 81 8.1 Technical specification
- 84 Chapter 9 Options and accessories
- 85 9.1 SeaTalk accessories
- 85 accessories
- 88 9.4 Spares and accessories
- 92 integration
- 94 Appendix B NMEA 0183 sentences
- 96 Appendix C NMEA 2000 sentences
- 98 Appendix D Connectors and pinouts