C-Nav3050 User Guide

Add to my manuals
186 Pages

advertisement

C-Nav3050 User Guide | Manualzz

C-Nav3050 User Guide

Section 6 - Safety Instructions

The C-Nav3050 GNSS sensor is designed for precise navigation and positioning using the GPS and GLONASS. Users must be familiar with the use of portable

GNSS equipment, the limitations thereof and these safety instructions prior to use of this equipment.

Transport

Always carry C-Nav equipment in either the original packing material or packaging that provides protection to the receiver and antenna against shock and vibration. Utilize all original packaging when transporting via rail, ship, or air.

Please note:

A ruggedized transportation case (P/N CNV3050CASE) is available to for users requiring additional shock and vibration protection for their C-

Nav equipment. Contact C-Nav Support for more information.

Maintenance

C-Nav equipment may be cleaned using a new lint free cloth moistened with pure alcohol. Connectors must be inspected and, if necessary, cleaned before use.

Always use the provided connector protective caps to minimize moisture and dirt ingress when not in use. Inspect cables regularly for kinks and cuts as these may cause interference and equipment failure.

Damp equipment must be dried at a temperature less than +40

C (104

F), but greater than 5

C (41

F) at the earliest opportunity.

External Power Source

The C-Nav3050 can be powered by an external power cable (P/N NAV94-

310274-3010LF) or using an AC Power Supply Kit (P/N CNV82-020007-3001LF) both included with every C-Nav3050. The C-Nav3050 must be connected to the

chosen external power solution in accordance with Section 3 - Interfacing (Page

50 ) It is important that the external power source allow sufficient current draw for

proper operation. Insufficient supplied current will cause damage to your external power source.

Revision

10

Page 81 of 186 6/8/2015

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents