Operation. Graco 332453G - ExactaBlend AGP Advanced Glazing Proportioner - AccessoriesAdd to my manuals
USB Kit, 24R936
When a USB memory device is inserted into the USB module, a status icon will appear on the DM screen. The icon will appear as shown when downloading is com plete.
This file shows the date, time, target ratio, actual ratio, average flow rate, and both pump A and pump B chemi cal dispenses. All chemical dispense values are shown in kilograms. The information is recorded at 5 second intervals.
NOTE: The data is recorded only when the system is in the “OK” state and during normal run mode dispensing.
This file shows the date, time, error/event codes, and the status of the codes. Refer to DM Error Codes within the ExactaBlend AGP Advanced Glazing Proportioner,
Setup-Operation manual for code information.
NOTE: The codes will have the following for the status column:
“0” - Error/event was generated
“1” - Machine acknowledged the error/event. There is no user acknowledgement required.
“2” - User acknowledged the error/event.
This file shows the date, time, part number, and soft ware versions currently installed on the machine.
NOTE: The file will only show the information when the download depth is set to “0”.
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project