How to install your detector. FireAngel CO-9X

It is not always possible to find an optimum location for an apparatus, for example, a small caravan may not have suitable vertical surfaces available Nevertheless, when fitting an apparatus in such situations, the two most important considerations when selecting an appropriate location are:

• Not mounting the apparatus directly above a source of heat or steam; and

• Mounting the apparatus at a distance of 1 – 3 m from the nearest edge of the potential source

HOW TO

INSTALL YOUR DETECTOR

NOTE: This apparatus should be installed by a competent person who feels able to install it according to the instructions

Firstly write the installation date on your detector in the area provided We recommend that your detector is installed on the wall

Drill hole spacing

66mm

12