advertisement
Menu Operation
Motion Detection Setting
The motion detection detects the moving objects in the scene by monitoring changes in brightness level. You can select the level of sensitivity for motion detection to 8 zone.
1. Select [MOTION DET] option.
2. Use [LEFT] or [RIGHT] button to select a [ON] and press
[SET]. The [MOTION DETECTION] menu appears.
3. Select [AREA SETUP] option.
• Use [LEFT] or [RIGHT] button to select a area (1/8 to 8/8) on the [AREA SELECTION].
• Use [LEFT] or [RIGHT] button to set up the [ON] or
[OFF] on the [STATE].
30
• Use [UP] or [DOWN] to select an option then use
[LEFT] or [RIGHT] button to adjust the option.
> POSITION
,/
: Moves horizontal position of the mask.
> POSITION
;.
: Moves vertical position of the mask.
> SIZE
,/
: Enlarge or decrease the horizontal size of the mask.
> SIZE
;.
: Enlarge or decrease the vertical size of the mask.
4. Use [SENSITIVITY] option to obtain the optimum detection level.
5. Use [LEFT] or [RIGHT] button to select the [DISPLAY] option.
6. Use [LEFT] or [RIGHT] button to select the [ALARM
OUT] option.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 8 Features
- 9 Part Names and Functions
- 11 Connections
- 11 Precautions
- 11 Connection Overview
- 12 Connecting Display device
- 12 Connecting Power Source
- 13 Connecting RS-485 Device
- 14 Connecting Alarm Device
- 15 Connecting Day&Night Switch
- 16 Mounting the Lens
- 18 Flange-back Adjustment
- 19 Mounting the camera
- 20 Menu Operation
- 20 OSD Menu control buttons
- 21 OSD Menu Overview
- 23 General Operation
- 24 Exposure Settings
- 28 White Balance settings
- 29 Day & Night Setting
- 30 Motion Detection Setting
- 31 3D-DNR Setting
- 31 Privacy Mask Setting
- 33 Special Menu Settings
- 37 SYSTEM Setting
- 39 Specification