The CTEU-EP, CPX-FB36, and CPX-CTEL-LK are Festo products that support the ability to add 3rd party IO-Link devices. These devices can be used to control various types of sensors and actuators, such as RFID readers, light stacks, and other IO-link devices. The application note provides detailed information on how to configure and use these products, including information on how to validate the IO-link devices, how to read diagnostics events, and how to set IO-link parameters.
advertisement
▼
Scroll to page 2
of
30
advertisement
Key Features
- Supports IO-Link devices
- Provides diagnostics for IO-Link devices
- Allows parameterization of IO-Link devices
- Integrates with Festo EtherNet/IP products
- Provides detailed documentation for setup and configuration
- Supports a range of 3rd party IO-Link devices
Related manuals
Frequently Answers and Questions
What is IO-Link?
IO-Link is a communication protocol for industrial automation that provides a standardized interface for connecting sensors and actuators to a control system.
How can I validate the IO-Link configuration?
The application note details how to retrieve vendor and device IDs via explicit messages to ensure the correct devices are connected to an IO-Link port.
How can I monitor diagnostics for IO-Link devices?
The application note describes how to monitor general diagnostics provided by the CPX or CTEU and how to read specific error information via explicit messages.
How can I parameterize IO-Link devices using the mailbox function?
The application note explains how to use the ISDU Access Object to access and modify parameters of IO-Link devices through the mailbox function.