Control Functions. Sundance Spas 680™ Series

680 Series

8.0 Control Functions

8.1 Control Panel

A

B

E

1

G

C

D

A

B

C D

1

E F G

2

Prado/Prado 5 Panel 2 Pump Panel Shown

A. LED Display: Can display current water temperature (default display), water temperature set point, selected filtration/heating mode, and error messages.

B. Heat Indicator: Lit when heater is on.

C. Warmer Button: Increases water temperature set point.

D. Cooler Button: Decreases water temperature set point.

E. Jets 1 Button: Turns jets pump #1 on and off. Press once for low speed; press a second time for high speed; press a third time to turn pump off.

F. Jets 2 Button (if equipped): Turns jets pump #2 on and off. Press once for high speed; press a second time to turn pump off.

G. Light Button:

• Denali and Tacoma Models: Turns underwater light on in random

mode or in one of six solid colors. Refer to Section 9.3 (page 2)

for details.

• Edison, McKinley, Peyton, Prado, Prado 5 and Ramona Models:

Turns accent lights on in one of three random modes or one of seven

solid colors. Refer to Section 9.4 (page 27) for details.

Operation Details

• Temperature Adjustment: 65 to 104°F (18 to 40°C). Factory default setting is 100°F (38°C).

• All lighting systems run for 1 hour then shut off.

• Jets 1/Jets 2 Button Operation: Jets run for 20 minutes after activated, then turn off automatically to conserve energy. Simply press either jets button to continue operation for an additional 20 minutes.

Page 23

680 Series

8.2 General Spa Features And Controls (McKinley and Ramona)

12

4

3

12

6

2

13

16

16

16

15

2

13

3

17

5

13 8

16

16

16

8

11

16

16

4

8

10

3

12

13

2

15

12

14

18

18

16

9

18

13

2

12

3

7

1

McKinley model illustrated - Jet locations and features will vary by model. Specifications subject to change without notice.

1. Control Panel

2. Headrest Pillows (4 ea.)

3. Air Controls (4 ea.)

4. Cup Holders (2 ea.)

5. Massage Selector (1 ea.)

6. Waterfall

7. Waterfall control valve (1 ea.)

8. Suction Fittings

9. Multiple LED accents lights

(10 ea.)

10. Gravity Drain: Fitting functions as floor gravity drain, heater return and CLEAR RAY purification system return.

11. Filter skimmer with one underlying filter cartridge (Filter needs periodic cleaning)

12. Optional BLUEWAVE® Spa

Stereo System (1 ea.) located in front spa skirt and speakers

(4 ea.)

13. DX Jets (10 ea.)

14. DVX Jets (2 ea.)

15. DVR Jets (6 ea.)

16. DL Jets (19 ea.)

17. DST Jet (1 ea.)

18. DXL Jets (6 ea.)

Page 24