advertisement
Menu Navigation
Sub-menu
Sub-menu items vary by the selected input signal.
J
PICTURE menu
See “PICTURE Menu” on page 28.
Sub-menu items
Default setting
1
PICTURE MODE
CONTRAST
BRIGHTNESS
COLOUR
TINT
SHARPNESS
COLOUR TEMPERATURE
DYNAMIC IRIS
LIGHT HARMONIZER
ADVANCED MENU
FAVOURITE SAVE
FAVOURITE LOAD
SIGNAL MODE
2
NORMAL
0
0
0
0
0
0
ON
AUTO
1. The default settings vary by the selected PICTURE MODE.
2. PC/COMPONENT/HDMI signals only
J
POSITION menu
See “POSITION Menu” on page 31.
Sub-menu items Default setting
V - POSITION
H - POSITION
0
0
DOT CLOCK
1
CLOCK PHASE
2
ASPECT
WSS
4
OVER SCAN
KEYSTONE
AUTO SETUP
5
0
0
AUTO
3
ON
+7
ON
1. PC signal only
2. COMPONENT/PC signals only
3. 16:9 for PC or HDMI signals
4. VIDEO/S-VIDEO/COMPONENT signals only
5. PC signal only
J
LANGUAGE menu
Select the required language option.
J
OPTION menu
See “OPTION Menu” on page 34.
Sub-menu items Default setting
INPUT GUIDE
OSD DESIGN
DETAILED
TYPE1
OSD POSITION
BACK COLOUR
STARTUP LOGO
AUTO SEARCH
INSTALLATION
SLEEP
ALTITUDE
LAMP POWER
LAMP RUNTIME
TEST PATTERN
CENTRE
BLUE
ON
ON
FRONT/DESK
OFF
LOW
NORMAL
E
NGLISH
- 27
Downloaded from www.Manualslib.com
manuals search engine http://www.pureglare.com.au
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 2 Important Safety Notice
- 6 Precautions with regard to safety
- 6 WARNINGS
- 8 CAUTIONS
- 9 Before use
- 9 Accessories
- 9 Cautions when transporting
- 9 Cautions when installing
- 10 Cautions on use
- 11 About Your Projector
- 11 Remote control
- 12 Projector
- 14 Setting up
- 14 Screen size and throw distance
- 15 Projection method
- 15 Front leg adjuster and throwing angle
- 16 Lens shift and positioning
- 18 Connections
- 18 Before connection to the projector
- 18 Connecting with AV devices
- 18 Connecting with HDMI/PC
- 19 Switching the projector on/off
- 19 Mains lead
- 19 POWER indicator
- 20 Switching on the projector
- 20 Switching off the projector
- 21 Projecting an image
- 21 Selecting the input signal
- 21 Positioning the image
- 22 Remote control operation
- 22 Operating range
- 22 Input switching
- 22 Capturing an image
- 23 Switching the aspect ratio
- 23 Switching off the projector automatically
- 23 Resetting to the factory default settings
- 23 Turning on the button backlight
- 23 Switching the picture mode
- 24 Adjusting the image
- 24 Setting your own colour profile
- 26 Menu Navigation
- 26 Navigating through the MENU
- 26 Main menu
- 27 Sub-menu
- 28 PICTURE Menu
- 28 PICTURE MODE
- 28 CONTRAST
- 28 BRIGHTNESS
- 28 COLOUR
- 29 SHARPNESS
- 29 COLOUR TEMPERATURE
- 29 DYNAMIC IRIS
- 29 LIGHT HARMONIZER
- 29 ADVANCED MENU
- 30 FAVOURITE SAVE
- 30 FAVOURITE LOAD
- 30 SIGNAL MODE
- 31 POSITION Menu
- 31 H - POSITION
- 31 V - POSITION
- 31 DOT CLOCK
- 31 CLOCK PHASE
- 32 ASPECT
- 33 OVER SCAN
- 33 KEYSTONE
- 33 AUTO SETUP
- 34 OPTION Menu
- 34 INPUT GUIDE
- 34 OSD DESIGN
- 34 OSD POSITION
- 34 BACK COLOUR
- 34 STARTUP LOGO
- 34 AUTO SEARCH
- 34 HDMI SIGNAL LEVEL
- 35 INSTALLATION
- 35 SLEEP
- 35 ALTITUDE
- 35 LAMP POWER
- 35 LAMP RUNTIME
- 35 TEST PATTERN
- 36 TEMP and LAMP Indicators
- 36 Controlling alerts
- 37 Care and Replacement
- 37 Before cleaning
- 37 Cleaning your projector
- 38 Before replacing the Lamp unit
- 38 When to replace the Lamp unit
- 39 Replacing the lamp unit
- 40 Troubleshooting
- 41 Technical Information
- 41 List of compatible signals
- 42 Serial terminal
- 45 Menu structure
- 46 Specifications
- 48 Dimensions
- 49 Trademark acknowledgements
- 50 Index