4. TROUBLESHOOTING TIPS. Gigabyte GV-R92128TE

Add to my manuals
32 Pages

advertisement

4. TROUBLESHOOTING TIPS. Gigabyte GV-R92128TE | Manualzz

4. Troubleshooting Tips

The following troubleshooting tips may help if you experience problems. Contact your dealer or GBT for more advanced troubleshooting information.

n Check that the card is seated properly in the AGP slot.

n Ensure that the display cable is securely fastened to the card's display connector.

n Make sure that the monitor and computer are plugged in and receiving power.

n If necessary, disable any built-in graphics capabilities on your motherboard. For more information, consult your computer's manual or manufacturer.

(NOTE: Some manufacturers do not allow the built-in graphics to be disabled or to become the secondary display.) n Make sure you selected the appropriate display device and graphics card when you installed the graphics driver.

n If you have problems during bootup, start your computer in Safe Mode. In Windows ®

98 SE and Windows

®

Me, press and hold the CTRL key until the Microsoft

®

Windows

®

Startup Menu appears on the screen. Then select the number for Safe Mode, and press Enter. (You can also use F8 to bring up the Microsoft Windows

®

Startup Menu.)

In Safe Mode, bring up the Device Manager and check for duplicate display adapter and monitor entries if you are only using one graphics card.

n For more assistance, use the Troubleshooting Guide located in the Windows

®

Help or contact your computer manufacturer.

If necessary, adjust your monitor's setting by monitor's adjust panel to make the screen looks focused, crisp, and sharp. (Please refer to the monitor’s manual.)

R92128TE_101.p65

31

- 31 Troubleshooting Tips

2003/6/30, 下午 04:13

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals