INSTALLATION. ERNITEC DigiOpG2 EDNS3000 Series

Add to My manuals
51 Pages

advertisement

INSTALLATION. ERNITEC DigiOpG2 EDNS3000 Series | Manualzz

DigiOpG2 Digital Video Recorder

3.

Installation

3.1

Connecting Peripheral Devices

This section describes how to efficiently hook up peripheral devices for usage with the EDNS-3000 series.

Install the EDNS-3000 series on flat surface. If required, attach the rubber mount for installation. If 19-inch rack is used, it is recommend to install the system on shelve and use 2.5~3U (1U=1.75 inch or 4.45cm) space for proper ventilation.

Note

Install system in location with good ventilation to prevent overheating.

Page 14

Caution

Depending on the grounding, the coaxial cable connecting to the camera has danger of electric shock. Shut down power of the system completely (unplug the power cable) before connecting video cable to BNC port.

3040-00052

advertisement

Related manuals