IMAGE BACKUP. ERNITEC DigiOpG2 EDNS3000 Series

Add to My manuals
51 Pages

advertisement

IMAGE BACKUP. ERNITEC DigiOpG2 EDNS3000 Series | Manualzz

DigiOpG2 Digital Video Recorder

5.

Image Backup

There are two ways to backup the recorded images of EDNS-3000 series. The first is by using internal CD-RW drive (option).

The second is by using USB external storage device.

5.1

CD Backup

Use the CD-RW attached to the EDNS-3000 series to backup the recorded images.

Press the [Backup] button on the front panel or IR Remote Controller and the following screen will appear.

Note

The specifications will show differently, depending on the model of CD-RW drive. Refer to the CD-RW drive manual for a detailed explanation.

Page 23

When the CD-RW drive is not installed or not properly connected, the following error message will appear. The following error message will also appear if CD-R media (Blank CD) for storage is not on the CD tray.

Note

Consult your vendor if you require detailed information on the CD-RW.

3040-00052

DigiOpG2 Digital Video Recorder

Enter each item on the screen below to backup recorded images.

1.

Select the recording start time for backup.

2.

Also, select the recording end time for backup.

3.

Select channels to backup. The user can select several channels together, but if the backup data capacity is more than the storage capacity, backup will not proceed. Select the channel by using the cursor and pressing [Enter] button.

4.

After selecting all the items, press [Next] button to proceed to the next screen.

Page 24

Note

Input the time by pressing the arrow (up, down, left, right) button of the front panel on the IR Remote Controller.

When the channels are not selected, error message will appear as shown below.

3040-00052

DigiOpG2 Digital Video Recorder

Press [Enter] after correctly selecting all the items correctly for backup. Proceed as indicated below.

Page 25

The following is the list of media supported in the internal CD-RW of EDNS-3000 series.

CD-R :

Acer, AMT, CMC, Kodak, LeadData, Maxell, Mitsubishi Chemical, Mitsui, Nan Ya, Philips, Princo, Prodisc, Ricoh,

Ritek, Sony, Taiyo Yuden, TDK, Verbatim, Yamaha

CD-RW :

Acer, AMT, CMC, Digimaster, Maxell, MaxMax, Melody, Mitsubishi Chemical, Philips, Plextor, Prodisc, Ricoh, Ritek,

Sony, TDK, Traxdata, Verbatim, Yamaha

When the backup is completed, the following message will appear.

3040-00052

advertisement

Related manuals