USB External Storage Device for Backup. ERNITEC DigiOpG2 EDNS3000 Series

Add to My manuals
51 Pages


USB External Storage Device for Backup. ERNITEC DigiOpG2 EDNS3000 Series | Manualzz

DigiOpG2 Digital Video Recorder


USB External Storage Device for Backup

EDNS-3000 series supports USB. Connect external storage device to the USB port on the front or back panel.

Click [BACKUP] button on the front panel and the screen below will appear.

Page 26


Below is a lists of USB external storage devices supported by the EDNS-3000 series. Consult your vendor if the devices do not operate properly.

1. AOpen CRW5224 External CD-RW Drive

2. AOpen EHW-4048U External CD-RW Drive

3. SONY CRX2100U External CD-RW Drive

4. Plextor PX-W4012TU External CD-RW Drive

5. DVICO MOMOBAY CX-2 2.5" External HDD

6. UNiCORN Portable HDD HD-250 External HDD

7. OTI FELLOW Flash Disk Drive

8. Hanbit STORiUM N Flash Disk Drive

EDNS-3000 series does not support DVD±RW drive. Should use of DVD±RW drive be required, use CD-R media versus DVD+RW or DVD-RW.

The following error message will appear if the USB storage fails to backup.


DigiOpG2 Digital Video Recorder

When the USB storage device is connected incorrectly, the following message will appear.

If there is not enough free disk space in the USB storage device, the following error message will appear.

The following message will appear when the image backup of the USB storage device has been completed.


To use USB storage for backup, use FAT file system. If the storage device is set to NTFS file system, backup will fail.


DO NOT connect two or more external USB storage devices to the system. If not, the system may not recognize those devices correctly. In addition, some USB hubs cannot be recognized correctly.

Page 27



Related manuals