System-Date and Time. ERNITEC DigiOpG2 EDNS3000 Series

Add to My manuals
51 Pages

advertisement

System-Date and Time. ERNITEC DigiOpG2 EDNS3000 Series | Manualzz

DigiOpG2 Digital Video Recorder

6.2

System-Date and Time

Set time and date of the system. Press arrow button to move the cursor to the desired position and to set correct and accurate value. Press [Save] button at the bottom of the screen to save the setting contents.

Page 32

6.2.1.

Date and Time

Input the current time and date accurately since the time and date of the system plays an important role in solving any problem with recorded image or event log.

The current time and date is stored in each recorded images with precision, and they are displayed during playback. Be cautious: Although the time and date stored in recorded images are wrong, they cannot be altered afterwards due to encryption.

Note

Users can change the time and date to the future without any problem. However, difficulty arises when changing it to the past (the same files might exist in the hard disk). Therefore, under complex recording setting, unexpected problems might arise in the system.

To solve such problems, EDNS-3000 series automatically deletes all the future files from the modified time and date. Consequently, be cautious when changing the date and time to the past. In addition, every function in the system operates normally since this procedure is handled in the background.

Note

When a long time has elapsed after a correct setting of the system time and date, the system time can go fast or slow. According to the specification of the RTC (Real Time Clock) used in EDNS-3000 series, the time difference can be 113 seconds per month in maximum. Therefore, the periodic (more than once per month) correction of the system time and date is required for the maintenance of accurate system time.

6.2.2.

Date Format

Set the date display format. Select the desired format in the date display format after pressing arrow button.

6.2.3.

Time Format

Set the time display format. Time format can be selected either by 24-hour or 12-hour base (AM or PM).

3040-00052

DigiOpG2 Digital Video Recorder

6.2.4.

Daylight Saving

Select the daylight saving time for each country. Daylight saving time setting is automatically processed when country is selected. Supported countries are displayed in the table below.

No.

9

11

13

15

17

5

7

1

3

19

21

23

25

Country

None

Austria

Brazil

Denmark

Finland

Germany

Israel

Mexico

Norway

Portugal

Spain

Switzerland

US

Representative Region

GMT

Europe/Vienna

Brazil/East

Europe/Copenhagen

Europe/Helsinki

Europe/Berlin

Israel

Mexico/General

Europe/Oslo

Portugal

Europe/Madrid

Europe/Zurich

US/Eastern

No.

10

12

14

16

18

6

8

2

4

20

22

24

Country

Australia

Belgium

Canada

Egypt

France

Greece

Italy

Holland

Poland

Russia

Sweden

UK

Representative Region

Australia/Melbourne

Europe/Brussels

Canada/Eastern

Egypt

Europe/Paris

Europe/Athens

Europe/Rome

Europe/Amsterdam

Europe/Warsaw

Moscow

Europe/Stockholm

Europe/London

Page 33

3040-00052

advertisement

Related manuals