System-Network. ERNITEC DigiOpG2 EDNS3000 Series

Add to My manuals
51 Pages

advertisement

System-Network. ERNITEC DigiOpG2 EDNS3000 Series | Manualzz

DigiOpG2 Digital Video Recorder

6.3

System-Network

Set the network environment of the system. An example of a LAN is shown below.

Note

Consult your vendor if user wants to use a modem.

Page 34

6.3.1.

Connection Type

Select either LAN or Modem by pressing the arrow button. Move to next item by pressing [Enter] button after selection.

6.3.2.

Host Address

Input the IP address assigned to EDNS-3000 series system.

Note

Use fixed IP for system IP.

For system IP, use the IP that is not used by other PC or DVR.

6.3.3.

Subnet Mask

Subnet Mask address recognizes the subnet to which the system belongs. Default is 255.255.255.0. Consult network administrator for accurate information.

6.3.4.

Default Gateway

This is the IP address of the network router or gateway. It is required when the user wants to connect through the external router from the remote. Default is 192.168.0.1.

Note

Consult your vendor if network connection configuration is required.

3040-00052

advertisement

Related manuals