Camera-Color. ERNITEC DigiOpG2 EDNS3000 Series

Add to My manuals
51 Pages

advertisement

Camera-Color. ERNITEC DigiOpG2 EDNS3000 Series | Manualzz

DigiOpG2 Digital Video Recorder

6.7

Camera-Color

Set the brightness, contrast, color and tint of the connected camera.

6.7.1.

Bright

Adjust the brightness (shades) of the channel. If the entire image is dark or bright to a great extent, adjust to the adequate value. Setting values are 1~100.

6.7.2.

Contrast

Adjust the contrast, which is the ratio of brightness to darkness of the image. Greater the value, bright side becomes brighter, and dark side becomes darker. In case the value is increased to the extent where too much saturation is not observed in the image, higher contrast can be helpful to display the image vividly. Setting values are 1~100.

6.7.3.

Color

Adjust the color density. In most cases except for the deterioration of cameras or very low quality cameras, the adjustment of this value is not required. Setting values are 1~100.

6.7.4.

Tint

Set the color hue of connected cameras. In most cases except for the deterioration of cameras or very low quality camera, the adjustment of this value is not required. Setting values are 1~100.

Page 39

3040-00052

advertisement

Related manuals