6.12 Tools-System Upgrade. ERNITEC DigiOpG2 EDNS3000 Series

Add to My manuals
51 Pages

advertisement

6.12 Tools-System Upgrade. ERNITEC DigiOpG2 EDNS3000 Series | Manualzz

DigiOpG2 Digital Video Recorder

6.12

Tools-System Upgrade

This screen appears during system upgrade. Enter the host address if upgrading through LAN or TFTP.

Page 45

6.12.1.

Select

Select the method to upgrade the system.

1.

LAN: will be supported in the future

2.

TFTP: to upgrade via TFTP protocol. The IP address of the host TFTP server is required.

3.

CD-ROM: to upgrade with the internal CD-RW (option)

Note

The following sequence is how to upgrade using the internal CD-RW.

1.

Prepare upgrade image CD.

2.

Put the prepared CD inside the CD-RW of the system.

3.

Select CD-ROM from Select category of the upgrade menu. Then, select the [Start] button.

4.

When the upgrade is completed without any error, no error message will be displayed and the system will automatically reboot after upgrade.

5.

The upgrade image CD must read the “hdvr.bin” image file at the root folder. Be cautious that the image file name must be in small letters, “hdvr.bin”.

6.12.2.

Host Address

Input the host server address of LAN connection.

6.12.3.

Version

Displays the version of the software that is being downloaded.

6.12.4.

Progress

Displays the progress while upgrading.

6.12.5.

Start

Starts the upgrade when pressed.

3040-00052

advertisement

Related manuals