3.2.9Video Communication Status Codes. ABB MicroSCADA

Add to My manuals
212 Pages

MicroSCADA Status Codes is a technical reference manual that lists all MicroSCADA status codes. It provides explanations of the codes and their possible causes, and divides them into groups based on their relation to the base system or communication and NET units.

advertisement

3.2.9Video Communication Status Codes. ABB MicroSCADA | Manualzz

MicroSCADA

3 Status Codes

3.2.9

3.2.10

3.2.11

58

Status Codes

Technical Reference Manual

1MRS751251-MEN

Video Communication Status Codes

6001

6002

6003

6004

VIDC_INVALID_MT_MESSAGE

VIDC_NO_MONITOR_TASK_CONNECTED

VIDC_UNSUPPORTED_MICROTERMINAL_TYPE

VIDC_NO_APPLICATION_TO_RUN

Printer Spooler Status Codes

6101 PRIN_APPLICATION_CLOSE_TIMEOUT

System Status Codes

7011

7012

7013

7014

7015

7017

7018

7019

7001

7002

7003

7004

7005

7006

7009

7010

7020

7021

7022

7023

7024

7025

7026

7029

7030

7031

SYST_NO_SUCH_TASK

SYST_STATION_ROUTING_TABLE_ERROR

SYST_APPLICATION_ROUTING_TABLE_ERROR

SYST_PRINTER_ROUTING_TABLE_ERROR

SYST_UNKNOWN_BASE_SYSTEM_OBJECT

SYST_UNKNOWN_BASE_SYSTEM_ATTRIBUTE

SYST_BAD_BASE_SYSTEM_ATTRIBUTE_STATUS

SYST_INVALID_ND_ATTRIBUTE_VALUE

SYST_ND_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_SA_ATTRIBUTE_VALUE

SYST_SA_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_SN_ATTRIBUTE_VALUE

SYST_INVALID_TT_ATTRIBUTE_VALUE

SYST_INVALID_TN_ATTRIBUTE_VALUE

SYST_TN_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_NA_ATTRIBUTE_VALUE

SYST_INVALID_ST_ATTRIBUTE_VALUE

SYST_INVALID_AP_ATTRIBUTE_VALUE

SYST_AP_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_PR_ATTRIBUTE_VALUE

SYST_PR_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_MO_ATTRIBUTE_VALUE

SYST_MO_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_SS_ATTRIBUTE_VALUE

SYST_INVALID_DC_ATTRIBUTE_VALUE

SYST_INVALID_SD_ATTRIBUTE_VALUE

ABB Automation

1MRS751251-MEN

ABB Automation

7065

7066

7067

7068

7069

7070

7071

7057

7058

7059

7060

7061

7062

7063

7064

7040

7041

7042

7043

7044

7045

7046

7047

7049

7050

7051

7055

7056

7032

7033

7034

7035

7036

7037

7038

7039

Status Codes

Technical Reference Manual

SYST_INVALID_MA_ATTRIBUTE_VALUE

SYST_INVALID_DT_ATTRIBUTE_VALUE

SYST_INVALID_LP_ATTRIBUTE_VALUE

SYST_LP_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_IA_ATTRIBUTE_VALUE

SYST_IA_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_LT_ATTRIBUTE_VALUE

SYST_INVALID_LI_ATTRIBUTE_VALUE

SYST_LI_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_NN_ATTRIBUTE_VALUE

SYST_APPLICATION_ALREADY_EXISTS

SYST_PRINTER_ALREADY_EXISTS

SYST_MONITOR_ALREADY_EXISTS

SYST_INPUT_DEVICE_ALREADY_EXISTS

SYST_LINK_ALREADY_EXISTS

SYST_NODE_ALREADY_EXISTS

SYST_APPLICATION_DOES_NOT_EXIST

SYST_PRINTER_DOES_NOT_EXIST

SYST_MONITOR_DOES_NOT_EXIST

SYST_ATTRIBUTE_NOT_INDEXED

SYST_OBJECT_NUMBER_OUT_OF_RANGE

SYST_APPLICATION_NUMBER_OUT_OF_RANGE

SYST_PRINTER_NUMBER_OUT_OF_RANGE

SYST_MONITOR_NUMBER_OUT_OF_RANGE

SYST_STATION_NUMBER_OUT_OF_RANGE

SYST_REPR_TASK_NUMBER_OUT_OF_RANGE

SYST_PRIN_TASK_NUMBER_OUT_OF_RANGE

SYST_ALARM_CLASS_OUT_OF_RANGE

SYST_DIAGNOSTIC_COUNTER_OUT_OF_RANGE

SYST_INVALID_DN_ATTRIBUTE_VALUE

SYST_DN_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_SH_ATTRIBUTE_VALUE

SYST_SH_ATTRIBUTE_OUT_OF_RANGE

SYST_STATION_ALREADY_EXISTS

SYST_INVALID_DS_ATTRIBUTE_VALUE

SYST_INVALID_MM_ATTRIBUTE_VALUE

MicroSCADA

3 Status Codes

59

MicroSCADA

3 Status Codes

7101

7102

7103

7104

7105

7106

7107

7093

7094

7095

7096

7097

7098

7099

7100

7080

7081

7082

7083

7084

7085

7086

7087

7088

7089

7090

7091

7092

7072

7073

7074

7075

7076

7077

7078

7079

Status Codes

Technical Reference Manual

SYST_MM_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_DM_ATTRIBUTE_VALUE

SYST_DM_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_TI_ATTRIBUTE_VALUE

SYST_TI_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_PC_ATTRIBUTE_VALUE

SYST_PC_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_RC_ATTRIBUTE_VALUE

SYST_RC_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_EP_ATTRIBUTE_VALUE

SYST_EP_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_ED_ATTRIBUTE_VALUE

SYST_INVALID_SP_ATTRIBUTE_VALUE

SYST_SP_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_TP_ATTRIBUTE_VALUE

SYST_TP_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_TD_ATTRIBUTE_VALUE

SYST_INVALID_AA_ATTRIBUTE_VALUE

SYST_AA_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_AS_ATTRIBUTE_VALUE

SYST_INVALID_QM_ATTRIBUTE_VALUE

SYST_QM_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_PM_ATTRIBUTE_VALUE

SYST_PM_ATTRIBUTE_OUT_OF_RANGE

SYST_ST_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_PQ_ATTRIBUTE_VALUE

SYST_PQ_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_QL_ATTRIBUTE_VALUE

SYST_QL_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_HB_ATTRIBUTE_VALUE

SYST_HB_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_EM_ATTRIBUTE_VALUE

SYST_EM_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_BR_ATTRIBUTE_VALUE

SYST_BR_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_SB_ATTRIBUTE_VALUE

60

1MRS751251-MEN

ABB Automation

1MRS751251-MEN

ABB Automation

7137

7138

7139

7140

7141

7142

7143

7129

7130

7131

7132

7133

7134

7135

7136

7116

7117

7118

7119

7120

7121

7122

7123

7124

7125

7126

7127

7128

7108

7109

7110

7111

7112

7113

7114

7115

Status Codes

Technical Reference Manual

SYST_SB_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_PY_ATTRIBUTE_VALUE

SYST_INVALID_RE_ATTRIBUTE_VALUE

SYST_INVALID_FC_ATTRIBUTE_VALUE

SYST_FC_ATTRIBUTE_OUT_OF_RANGE

SYST_NA_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_EN_ATTRIBUTE_VALUE

SYST_EN_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_ER_ATTRIBUTE_VALUE

SYST_ER_ATTRIBUTE_OUT_OF_RANGE

SYST_VARIABLE_INDEX_OUT_OF_RANGE

SYST_INVALID_SV_OR_UV_ATTRIBUTE_VALUE

SYST_VECTOR_VALUE_EXPECTED

SYST_ATTRIBUTE_INDEX_MISSING

SYST_ATTRIBUTE_NOT_SETTABLE

SYST_APPLICATION_NAME_MISSING

SYST_APPLICATION_IS_RUNNING

SYST_PRINTER_IS_RUNNING

SYST_MONITOR_IS_RUNNING

SYST_INPUT_DEVICE_IS_RUNNING

SYST_LINK_IS_RUNNING

SYST_ATTRIBUTE_INDEX_OUT_OF_RANGE

SYST_SINGLE_INDEX_EXPECTED

SYST_INVALID_RS_ATTRIBUTE_VALUE

SYST_RS_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_CL_ATTRIBUTE_VALUE

SYST_INVALID_CA_ATTRIBUTE_VALUE

SYST_CA_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_CF_ATTRIBUTE_VALUE

SYST_CF_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_TZ_ATTRIBUTE_VALUE

SYST_TZ_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_TF_ATTRIBUTE_VALUE

SYST_TF_ATTRIBUTE_OUT_OF_RANGE

SYST_STATION_DOES_NOT_EXIST

SYST_NODE_ROUTING_ERROR

MicroSCADA

3 Status Codes

61

MicroSCADA

3 Status Codes

62

7173

7174

7175

7176

7177

7178

7179

7165

7166

7167

7168

7169

7170

7171

7172

7152

7153

7154

7155

7156

7157

7158

7159

7160

7161

7162

7163

7164

7144

7145

7146

7147

7148

7149

7150

7151

Status Codes

Technical Reference Manual

1MRS751251-MEN

SYST_INVALID_PS_ATTRIBUTE_VALUE

SYST_PS_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_MS_ATTRIBUTE_VALUE

SYST_MS_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_MI_ATTRIBUTE_VALUE

SYST_MI_ATTRIBUTE_OUT_OF_RANGE

SYST_APPLICATION_IS_NOT_LOCAL

SYST_INVALID_FM_ATTRIBUTE_VALUE

SYST_FM_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_LD_ATTRIBUTE_VALUE

SYST_INVALID_LL_ATTRIBUTE_VALUE

SYST_INVALID_LF_ATTRIBUTE_VALUE

SYST_INVALID_OD_ATTRIBUTE_VALUE

SYST_FAILED_TO_START_PROGRAM

SYST_APPLICATION_IS_LOCAL

SYST_PRINTER_NOT_IN_NET

SYST_INVALID_TR_ATTRIBUTE_VALUE

SYST_LAN_LINK_ALREADY_RUNNING

SYST_INVALID_PN_ATTRIBUTE_VALUE

SYST_INVALID_HF_ATTRIBUTE_VALUE

SYST_INVALID_FS_ATTRIBUTE_VALUE

SYST_SN_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_SHADOWING_PHASE

SYST_INVALID_SW_ATTRIBUTE_VALUE

SYST_SW_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_SC_ATTRIBUTE_VALUE

SYST_SC_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_SF_ATTRIBUTE_VALUE

SYST_SF_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_SR_ATTRIBUTE_VALUE

SYST_SR_ATTRIBUTE_OUT_OF_RANGE

SYST_SHADOW_CONNECTION_REQUEST_FAILED

SYST_SHADOWING_ALREADY_ACTIVE

SYST_SHADOWING_IS_DISABLED

SYST_EXECUTION_QUEUE_OUT_OF_RANGE

SYST_INVALID_DB_ATTRIBUTE_VALUE

ABB Automation

1MRS751251-MEN

ABB Automation

7209

7210

7211

7212

7213

7214

7215

7201

7202

7203

7204

7205

7206

7207

7208

7188

7189

7190

7191

7192

7193

7194

7195

7196

7197

7198

7199

7200

7180

7181

7182

7183

7184

7185

7186

7187

Status Codes

Technical Reference Manual

MicroSCADA

3 Status Codes

SYST_NODE_NUMBER_OUT_OF_RANGE

SYST_STATION_TYPE_ALREADY_EXISTS

SYST_INVALID_DI_ATTRIBUTE_VALUE

SYST_DI_ATTRIBUTE_OUT_OF_RANGE

SYST_SHADOWING_TRANSMISSION_TIMEOUT

SYST_SHADOWING_REVISION_INCOMPATIBLE

SYST_SHADOW_MEMORY_DUMP_FAILED

SYST_SHADOW_RECEIVER_ALREADY_CONNECTED

SYST_SHADOW_MESSAGE_SEQUENCE_ERROR

SYST_INVALID_SI_ATTRIBUTE_VALUE

SYST_SI_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_SY_ATTRIBUTE_VALUE

SYST_SY_ATTRIBUTE_OUT_OF_RANGE

SYST_MEMORY_EXHAUSTED

SYST_LOCAL_SHADOWING_FAILED

SYST_NO_LOCAL_RAM_SHADOWING

SYST_INVALID_AQ_ATTRIBUTE_VALUE

SYST_INVALID_IL_ATTRIBUTE_VALUE

SYST_IL_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_BP_ATTRIBUTE_VALUE

SYST_CL_ATTRIBUTE_OUT_OF_RANGE

SYST_ATTRIBUTE_IS_WRITE_ONLY

SYST_PRINTER_IS_NOT_RUNNING

SYST_INVALID_EE_ATTRIBUTE_VALUE

SYST_EE_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_RN_ATTRIBUTE_VALUE

SYST_RN_ATTRIBUTE_OUT_OF_RANGE

SYST_DT_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_SL_ATTRIBUTE_VALUE

SYST_SL_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_CS_ATTRIBUTE_VALUE

SYST_PRINTER_CONTROL_TIMEOUT

SYST_PRINTER_OPEN_ERROR

SYST_NOT_A_TRANSPARENT_PRINTER

SYST_INVALID_CX_ATTRIBUTE_VALUE

SYST_INVALID_OJ_ATTRIBUTE_VALUE

63

MicroSCADA

3 Status Codes

64

7245

7246

7247

7248

7249

7250

7251

7237

7238

7239

7240

7241

7242

7243

7244

7224

7225

7226

7227

7228

7229

7230

7231

7232

7233

7234

7235

7236

7216

7217

7218

7219

7220

7221

7222

7223

Status Codes

Technical Reference Manual

1MRS751251-MEN

SYST_OJ_ATTRIBUTE_OUT_OF_RANGE

SYST_NOT_SUPPORTED_BY_CLIENT

SYST_SYSTEM_ALREADY_RUNNING

SYST_INVALID_TS_ATTRIBUTE_VALUE

SYST_INVALID_SQ_ATTRIBUTE_VALUE

SYST_SQ_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_CP_ATTRIBUTE_VALUE

SYST_INVALID_DE_ATTRIBUTE_VALUE

SYST_DE_ATTRIBUTE_OUT_OF_RANGE

SYST_NOT_AN_INTEGRATED_LINK

SYST_RS_NOT_SUPPORTED_FOR_THE_LINK_TYPE

SYST_INVALID_HM_ATTRIBUTE_VALUE

SYST_HM_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_QP_ATTRIBUTE_VALUE

SYST_INVALID_QD_ATTRIBUTE_VALUE

SYST_QD_ATTRIBUTE_OUT_OF_RANGE

SYST_PARALLEL_QUEUE_OUT_OF_RANGE

SYST_INVALID_LA_ATTRIBUTE_VALUE

SYST_INVALID_AN_ATTRIBUTE_VALUE

SYST_AN_ATTRIBUTE_OUT_OF_RANGE

SYST_NOT_SUPPORTED_IN_WIN32S

SYST_INVALID_ON_ATTRIBUTE_VALUE

SYST_INVALID_CT_ATTRIBUTE_VALUE

SYST_PRIVATE_COLORS_NOT_SUPPORTED

SYST_INVALID_DU_ATTRIBUTE_VALUE

SYST_DU_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_PH_ATTRIBUTE_VALUE

SYST_INVALID_RL_ATTRIBUTE_VALUE

SYST_INVALID_HP_ATTRIBUTE_VALUE

SYST_EXTERNAL_COMMUNICATION_BLOCKED

SYST_INVALID_OE_ATTRIBUTE_VALUE

SYST_OE_ATTRIBUTE_OUT_OF_RANGE

SYST_INVALID_OT_ATTRIBUTE_VALUE

SYST_INVALID_CD_ATTRIBUTE_VALUE

SYST_NO_EXTERNAL_CLOCK

SYST_OT_ATTRIBUTE_OUT_OF_RANGE

ABB Automation

advertisement

Key Features

  • Lists all MicroSCADA status codes
  • Provides explanations of the codes
  • Divides codes into groups
  • Covers base system and NET units
  • Technical reference manual

Related manuals

Frequently Answers and Questions

What is the purpose of the MicroSCADA Status Codes?
Status codes are used to indicate the reliability of data, inform about errors during SCIL program execution, and communicate events in the process communication system or communication units.
How are status codes grouped?
Status codes are grouped into categories: reliability of data, base system status codes, NET status codes, operating system status codes, data transfer status codes, and status codes transmitted by a NET unit to external devices.
What is the OK status code?
The OK status code is 0, indicating that no error has occurred.
What is the difference between almost OK status codes and error codes?
Almost OK status codes (1, 2, 3) indicate a warning or uncertain value that can be used in expressions but may result in a non-zero status. Error codes (10 .. 10 000) are used for errors in the system.