Install Device Drivers. TDK Velocd

Add to My manuals
35 Pages

advertisement

Install Device Drivers. TDK Velocd | Manualzz

INSTALLING and USING SOFTWARE

Before you can begin to use your veloCD ReWRITER you need to install the software from the included

CD Blender CD-ROM. The software automatically loads all necessary device drivers as well as

TDK’s CD Blender Software Suite.

If you have any problems, our technical support staff will help you.

INSTALL DEVICE DRIVERS

Your veloCD ReWRITER acts as a "CD-ROM Drive" for purposes of installation and setup. In some cases, you will need to install additional drivers to make use of all of the features of the veloCD

ReWRITER.

Using the veloCD on a PC:

As a CD-ROM: The computer’s operating system, Windows 98/ME/2000/XP/NT 4.0, supplies a generic

CD-ROM device driver that allows the veloCD ReWRITER to function as a standard CD-ROM drive.

You don’t need to install anything else.

As a CD-R or CD-RW device: In order to write to CD-R or CD-RW media, you will need to install the

TDK CD Blender Software Suite.

To install a device driver, follow the instructions provided by the driver’s supplier.

SECTION

3

SECTION 3 : Installing and Using Software

15

advertisement

Related manuals