Rear panel. Asus T2-R

Add to my manuals
94 Pages

advertisement

Rear panel. Asus T2-R | Manualzz

14

1.3

Rear panel

The system rear panel includes the power socket and several I/O ports that allow convenient connection of devices.

1

2

7

8

9

10

11

12

5

6

3

4

16

17

18

19

20

13 14 15

1.

GAME/MIDI port. This port connects a joystick, or game pad for playing games, and MIDI devices for audio editing.

2.

Telephone port (optional). This port connects an RJ-11 cable jack.

Connect one end of an RJ-11 cable to this port and the other end to the RJ-11 port of the telephone unit.

3.

RJ-11 port (optional). This port connects an RJ-11 cable jack.

Connect one end of an RJ-11 cable to this port and the other end to the RJ-11 wall socket.

4.

Serial port. This port connects a mouse, modem, or other devices that conforms with serial specification.

5.

PS/2 mouse port. This green 6-pin connector is for a PS/2 mouse.

6.

PS/2 keyboard port. This purple 6-pin connector is for a PS/2 keyboard.

7.

VGA port. This port connects a VGA monitor.

8.

Parallel port. This 25-pin port connects a printer, scanner, or other devices.

Chapter 1: System introduction

9.

Line Out port. This Line Out (lime) port connects a headphone or a speaker. In 4/6-channel mode, the function of this port becomes Front

Speaker Out.

10. Line In port. This Line In (light blue) port connects a tape player or other audio sources. In 6-channel mode, the function of this port becomes Low Frequency Enhanced Output/Center.

11. Microphone port. This Microphone (pink) port connects a microphone. In 4/6-channel mode, the function of this port becomes

Surround Speaker.

12. USB 2.0 ports. These Universal Serial Bus 2.0 (USB 2.0) ports are available for connecting USB 2.0 devices such as a mouse, printer, scanner, camera, PDA, and others.

13. Ethernet LAN port. This port allows connection to a Local Area

Network (LAN) through a network hub.

14. AGP slot cover. Remove this cover when installing an AGP card.

15. PCI slot cover. Remove this cover when installing an AGP card.

16. Chassis fan. This fan provides ventilation inside the system chassis.

17. Power supply unit fan. This fan provides ventilation inside the power supply unit.

18. Power socket. This socket connects the power cable and plug.

19. Voltage selector. This switch allows you to select the appropriate voltage supply in your area. See the “Voltage selector” section on page 34 before adjusting this switch.

20. Expansion card lock. This metal lock secures installed expansion cards. See page 27 for details.

ASUS Terminator 2 barebone system 15

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents