Preparation. Asus T2-R

Add to my manuals
94 Pages

advertisement

Preparation. Asus T2-R | Manualzz

2.1

Preparation

Before you proceed, make sure that you have all the components that you plan to install in the system.

Basic components to install

1. Central processing unit (CPU)

2. DDR Dual Inline Memory Module (DIMM)

3. Expansion card(s)

4. Hard disk drive

5. Second optical drive

Tool

Phillips (cross) screw driver

2.2

Before you proceed

Take note of the following precautions before you install components into the system.

1. Use a grounded wrist strap or touch a safely grounded object or to a metal object, such as the power supply case, before handling components to avoid damaging them due to static electricity.

2. Hold components by the edges to avoid touching the ICs on them.

3. Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that came with the component.

The motherboard comes with an onboard standby power LED. When lit, this LED indicates that the system is ON, in sleep mode or in soft-off mode, and not powered OFF. Unplug the power cable from the power outlet and make sure that the standby power LED is OFF before installing any system component.

18

®

P4R8T

P4R8T Onboard LED

SB_PWR

ON

Standby

Power

OFF

Powered

Off

Chapter 2: Basic installation

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents