Removing the power supply. Asus T2-R

Add to my manuals
94 Pages

advertisement

Removing the power supply. Asus T2-R | Manualzz

2.4

Removing the power supply

You must remove the power supply unit (PSU) before you can install a central processing unit (CPU) and other system components. See page

33-35 for details on the PSU.

To remove the PSU:

1.

Lay the system on its side on a flat, stable surface.

2.

Disconnect all power plugs from the optical drive and floppy disk drive.

3.

Remove the screw that secures the PSU to the chassis.

3

4.

Slide the PSU to the left until the side hook is disengaged from the chassis.

5.

Push the PSU towards the front panel for about half an inch.

6.

Slightly lift the PSU.

4

6

5

20

7.

Disconnect the power plugs from the motherboard.

8.

Set the PSU aside.

When removing the PSU, make sure to hold or support it firmly. The unit may accidentally drop and damage other system components.

7

7

Chapter 2: Basic installation

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents