Installing a CPU. Asus T2-R

Add to my manuals
94 Pages

advertisement

Installing a CPU. Asus T2-R | Manualzz

2.5

Installing a CPU

The P4R8T motherboard comes with a surface mount 478-pin Zero

Insertion Force (ZIF) socket. This socket is specifically designed for Intel

®

Pentium

®

4 Northwood/Prescott processor.

2.5.1 Removing the CPU fan and heatsink assembly

The system package includes a pre-installed proprietary CPU fan and heatsink assembly to ensure optimum thermal condition and performance.

DO NOT replace the proprietary CPU fan and heatsink with other models.

You must remove the CPU fan and heatsink assembly before you can install a CPU.

To remove the CPU fan and heatsink assembly:

1.

Carefully press down the locking lever of the retention bracket

2.

Detach the retention bracket hook from the retention module hole by flipping the locking lever to the direction of the arrow.

1

2

3.

Slightly lift the retention bracket.

3

4.

Detach the other retention bracket hook from the hole on the other side of the retention module, then lift.

5.

Do steps 1-4 to remove the second retention bracket.

4

ASUS Terminator 2 barebone system

5

21

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents