CPU installation. Asus T2-R

Add to my manuals
94 Pages

advertisement

CPU installation. Asus T2-R | Manualzz

22

6.

Disconnect the CPU fan cable from the CPU fan connector on the motherboard.

7.

Lift the CPU fan and heatsink assembly, then set aside.

7

6

2.5.2 CPU installation

To install the CPU:

1.

Locate the 478-pin CPU socket on the motherboard.

2.

Unlock the socket by pressing the lever sideways then lifting it up to a

90° angle.

3.

Position the CPU above the socket such that its marked corner (gold mark) matches the base of the socket lever.

4.

Carefully insert the CPU into the socket until it fits in place.

5.

Push down the socket lever to secure the CPU. The lever clicks on the side tab to indicate that it is locked.

3

4

5

1

2

Chapter 2: Basic installation

2.5.3 Re-installing the CPU fan and heatsink assembly

To re-install the CPU fan and heatsink assembly:

1.

Position the CPU fan and heatsink assembly on top of the installed CPU.

1

2.

Align the retention bracket with the rails on the side of the CPU fan.

3.

Attach the retention bracket hook to the retention module hole.

4.

Carefully press down the locking lever on the other side of the retention bracket.

5.

Attach the locking lever hook to the retention module hole to secure the fan and heatsink assembly in place.

6.

Follow steps 2 to 5 to re-install the second retention bracket.

7.

Connect the CPU fan cable to the CPU fan connector on the motherboard.

3

2

4

5

7

ASUS Terminator 2 barebone system 23

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents