2.10 Re-installing the power supply unit. Asus T2-R

Add to my manuals
94 Pages

advertisement

2.10 Re-installing the power supply unit. Asus T2-R | Manualzz

2.10 Re-installing the power supply unit

After installing the system components and reconnecting the cables, re-install the power supply unit (PSU).

To reinstall the PSU:

1.

Connect the 4-pin and 20-pin power plugs to the ATX12V and

ATXPWR connectors on the motherboard. See page 54 for the location of the power connectors.

1

1

2.

Position the PSU over the chassis.

3.

Align the PSU side hook with the metal slot located in the side of the optical drive bay.

4.

Slide the PSU toward the direction of the rear panel until it fits in place.

5.

Secure the PSU with the screw you removed earlier.

Make sure the PSU cables do not interfere with CPU and chassis fans.

5

4

3

2

ASUS Terminator 2 barebone system 33

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents