Using ASUS EZ Flash to update the BIOS. Asus T2-R

Add to my manuals
94 Pages

advertisement

Using ASUS EZ Flash to update the BIOS. Asus T2-R | Manualzz

64

5.1.4 Using ASUS EZ Flash to update the BIOS

The ASUS EZ Flash feature allows you to easily update the BIOS without having to go through the long process of booting from a floppy disk and using a DOS-based utility. The EZ Flash is built-in the BIOS LPC chip so it is accessible by simply pressing <Alt> + <F2> during the Power-On Self

Tests (POST).

To update the BIOS using ASUS EZ Flash:

1.

Visit the ASUS website (www.asus.com) to download the latest BIOS file for your motherboard and rename it to P4R8T.ROM. Save the

BIOS file to a floppy disk.

2.

Reboot the system.

3.

To launch EZ Flash, press <Alt> + <F2> during POST to display the following.

User recovery requested. Starting BIOS recovery...

Checking for floppy...

If there is no floppy disk found in the drive, the error message “Floppy

not found!” appears.

If the correct BIOS file is not found in the floppy disk, the error message “P4R8T.ROM not found!

4.

Insert the floppy disk that contains the BIOS file. If the P4R8T.ROM file is found in the floppy disk, EZ Flash performs the BIOS update process and automatically reboots the system when done.

DO NOT shutdown or reset the system while updating the BIOS! Doing so may cause system boot failure!

User recovery requested. Starting BIOS recovery...

Checking for floppy...

Floppy found!

Reading file “p4r8t.rom”. Completed.

Start flashing...

Flashed successfully. Rebooting.

Chapter 5: BIOS setup

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents