Hardware Monitor. Asus T2-R

Add to my manuals
94 Pages

advertisement

Hardware Monitor. Asus T2-R | Manualzz

5.5.6 Hardware Monitor

Hardware Monitor

MB Temperature

CPU Temperature

CPU Fan Speed

Chassis Fan Speed

VCORE Voltage

3.3V Voltage

5V Voltage

12V Voltage

SMART Q-Fan Function

[36°C/96.5°F]

[44°C/111°F]

[5234RPM]

[N/A]

[1.808V]

[3.376V]

[5.080V]

[11.977V]

[Enabled]

Fan Auto Mode Start Voltage [5.0V]

Fan Auto Mode Start Temp [30°C]

Fan Auto Mode Full Speed Temp [70°C]

CPU temperature.

MB Temperature [xxxºC/xxxºF]

CPU Temperature [xxxºC/xxxºF]

The onboard hardware monitor automatically detects and displays the motherboard and CPU temperatures. Select [Disabled] if you do not wish to display the detected temperatures.

CPU Fan Speed [xxxxRPM] or [N/A]

Chassis Fan Speed [xxxxRPM] or [N/A]

The onboard hardware monitor automatically detects and displays the CPU, chassis, and power fan speeds in rotations per minute (RPM). If any of the fans is not connected to the motherboard, the specific field shows N/A.

VCORE Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage

The onboard hardware monitor automatically detects the voltage output through the onboard voltage regulators.

If any of the monitored items is out of range, the following error message appears: “Hardware Monitor found an error. Enter Power setup menu for details”. You will then be prompted to “Press F1 to continue or DEL to enter SETUP”.

SMART Q-Fan Function [Enabled]

This item allows you to enable or disable the ASUS Smart Q-Fan feature that smartly adjusts the fan speeds for more efficient system operation.

Configuration options: [Enabled] [Disabled]

ASUS Terminator 2 barebone system 85

The following items appear only when the Smart Q-Fan Function item is set to Enabled.

Fan Auto Mode Start Voltage [5.0V]

This item allows you to select the voltage for the auto start fan feature. The fan starts when the system reaches the specified voltage.

Configuration options: [4.0V] [4.5V] [5.0V] [5.5V] [6.0V]

Fan Auto Mode Start Temp [30ºC]

Select the temperature for the auto start fan feature. The fan starts when the system reaches the specified temperature.

Configuration options: [25ºC]...[75ºC]

Fan Auto Mode Full Speed Temp [70ºC]

Select the temperature for the fan to rotate in full speed. The fan switches to full speed when the system reaches the specified temperature.

Configuration options: [25ºC]...[75ºC]

86 Chapter 5: BIOS setup

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents