Boot Settings Configuration. Asus T2-R

Add to my manuals
94 Pages

advertisement

Boot Settings Configuration. Asus T2-R | Manualzz

5.6.2 Boot Settings Configuration

Boot Settings Configuration

Quick Boot

Full Screen Logo

Add On ROM Display Mode

Bootup Num-Lock

Wait for ‘F1’ If Error

Hit ‘DEL’ Message Display

Interrupt 19 Capture

[Enabled]

[Enabled]

[Force BIOS]

[On]

[Enabled]

[Enabled]

[Disabled]

Allows BIOS to skip certain tests while booting. This will decrease the time needed to boot the system.

88

Quick Boot [Enabled]

Enabling this item allows the BIOS to skip some power on self tests

(POST) while booting to decrease the time needed to boot the system.

When set to [Disabled], BIOS performs all the POST items.

Configuration options: [Enabled] [Disabled]

Full Screen Logo [Enabled]

This allows you to enable or disable the full screen logo display feature.

Configuration options: [Enabled] [Disabled]

Make sure that the Full Screen Logo item is set to [Enabled] if you wish to use the ASUS MyLogo2™ feature.

Add On ROM Display Mode [Force BIOS]

Sets the display mode for option ROM.

Configuration options: [Force BIOS] [Keep Current]

Bootup Num-Lock [On]

Allows you to select the power-on state for the NumLock.

Configuration options: [On] [Off]

Wait for ‘F1’ If Error [Enabled]

When set to Enabled, the system waits for F1 key to be pressed when error occurs. Configuration options: [Enabled] [Disabled]

Hit ‘DEL’ Message Display [Enabled]

When set to Enabled, the system displays the message “Press DEL to run

Setup” during POST. Configuration options: [Enabled] [Disabled]

Chapter 5: BIOS setup

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents