Security. Asus T2-R

Add to my manuals
94 Pages

advertisement

Security. Asus T2-R | Manualzz

Interrupt 19 Capture [Disabled]

When set to [Enabled], this function allows the option ROMs to trap

Interrupt 19. Configuration options: [Disabled] [Enabled]

5.6.3 Security

The Security menu items allow you to change the system security settings.

Select an item then press Enter to display the configuration options.

Security Settings

Supervisor Password

User Password

Change Supervisor Password

Change User Password

Clear User Password

Not Installed

Not Installed

<Enter> to change password.

<Enter> again to disable password.

Change Supervisor Password

Select this item to set or change the supervisor password. The Supervisor

Password item on top of the screen shows the default Not Installed. After you have set a password, this item shows Installed.

To set a Supervisor Password:

1.

Select the Change Supervisor Password item and press Enter.

2.

On the password box that appears, type a password composed of letters and/or numbers, then press Enter. Your password should have at least six characters.

3.

Confirm the password when prompted.

The message “Password Installed” appears after you have successfully set your password.

The Supervisor Password item now shows Installed.

To change the supervisor password, follow the same steps as in setting a user password.

To clear the supervisor password, select the Change Supervisor Password then press Enter. The message “Password Uninstalled” appears.

ASUS Terminator 2 barebone system 89

If you forget your BIOS password, you can clear clear it by erasing the

CMOS Real Time Clock (RTC) RAM. See section 4.3 “Jumper” for information on how to erase the RTC RAM.

After you have set a supervisor password, the other items appear to allow you to change other security settings.

Security Settings

Supervisor Password Not Installed

User Password Not Installed

Change Supervisor Password

User Access Level [Full Access]

Change User Password

Clear User Password

Password Check [Setup]

<Enter> to change password.

<Enter> again to disable password.

90

User Access Level (Full Access]

This item allows you to select the access restriction to the Setup items.

Configuration options: [No Access] [View Only] [Limited] [Full Access]

No Access prevents user access to the Setup utility.

View Only allows access but does not allow change to any field.

Limited allows change to only selected fields, such as Date and Time.

Full Access allows viewing and changing all the fields in the Setup utility.

Change User Password

Select this item to set or change the user password. The User Password item on top of the screen shows the default Not Installed. After you have set a password, this item shows Installed.

To set a User Password:

1.

Select the Change User Password item and press Enter.

2.

On the password box that appears, type a password composed of letters and/or numbers, then press Enter. Your password should have at least six characters.

3.

Confirm the password when prompted.

Chapter 5: BIOS setup

The message “Password Installed” appears after you have successfully set your password.

The User Password item now shows Installed.

To change the user password, follow the same steps as in setting a user password

Clear User Password

Select this item if you wish to clear the user password.

Password Check [Setup]

When set to [Setup], BIOS checks for user password when accessing the

Setup utility. When set to [Always], BIOS checks for user password both when accessing Setup and booting the system.

Configuration options: [Setup] [Always]

ASUS Terminator 2 barebone system 91

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents