Ordering information. ENDRESS+HAUSER Levelflex FMP55

Levelflex FMP55

Compact device Levelflex

Ordering information

1

2

3

5 6

4

Product structure FMP55

å

13 Design of the Levelflex

1 Electronics housing

2 Process connection (here as an example: flange)

3 Rope probe

4 End-of-probe weight

5 Rod probe

6 Coax probe

This overview does not mark options which are mutually exclusive.

Option with * = in preparation

010 Approval:

AA Non-hazardous area

BA ATEX II 1G Ex ia IIC T6

BB ATEX II 1/2G Ex ia IIC T6

BC ATEX II 1/2G Ex d(ia) IIC T6

BD ATEX II 1/3G Ex ic(ia) IIC T6

BG ATEX II 3G Ex nA IIC T6

BH ATEX II 3G Ex ic IIC T6

B2 ATEX II 1/2G Ex ia IIC T6, 1/2D Ex tD IIIC IP6x

B3 ATEX II 1/2G Ex d(ia) IIC T6, 1/2D Ex tD IIIC IP6x

B4 ATEX II 1/2G Ex ia IIC T6, Ex d(ia) IIC T6

CA CSA General Purpose

C2 CSA C/US IS Cl.I,II,III Div.1 Gr.A-G, NI Cl.1 Div.2, Ex ia

C3 CSA C/US XP Cl.I,II,III Div.1 Gr.A-G, NI Cl.1 Div.2, Ex d

FB FM IS Cl.I,II,III Div.1 Gr.A-G, AEx ia, NI Cl.1 Div.2

FD FM XP Cl.I,II,III Div.1 Gr.A-G, AEx d, NI Cl.1 Div.2

IA IEC Ex Zone 0 Ex ia IIC T6 Ga

IB IEC Ex Zone 0/1 Ex ia IIC T6 Ga/Gb

IC IEC Ex Zone 0/1 Ex d(ia) IIC T6 Ga/Gb

42

A0012399

Endress+Hauser

Levelflex FMP55

Endress+Hauser

010 Approval:

ID IEC Ex Zone 0/2 Ex ic(ia) IIC T6 Ga/Gc

IG IEC Ex Zone 2 Ex nA IIC T6 Gc

IH IEC Ex Zone 2 Ex ic IIC T6 Gc

I2 IEC Ex Zone 0/1 Ex ia IIC T6 Ga/Gb, Zone 20/21 Ex tD IIIC A20/21 IP6x Da/Db

I3 IEC Ex Zone 0/1 Ex d(ia) IIC T6 Ga/Gb, Zone 20/21 Ex tD IIIC A20/21 IP6x Da/Db

NA *NEPSI zone 0 Ex ia IIC T6 Ga

NB *NEPSI zone 0/1 Ex ia IIC T6 Ga/Gb

NC *NEPSI zone 0/1 Ex d(ia) IIC T6 Ga/Gb

NG *NEPSI zone 2 Ex nA II T6 Gc

NH *NEPSI zone 2 Ex ic IIC T6 Gc

N2 *NEPSI zone 0/1 Ex ia IIC T6 Ga/Gb, zone 20/21 Ex tD IIIC A20/21 IP6x Da/Db

N3 *NEPSI zone 0/1 Ex d(ia) IIC T6 Ga/Gb, zone 20/21 Ex tD IIIC A20/21 IP6x Da/Db

8A FM/CSA IS+XP Cl.I,II,III Div.1 Gr.A-G

99 Special version, TSP-no. to be sepc.

020 Power Supply, Output

A 2-wire; 4-20mA HART

C 2-wire; 4-20mA HART, 4-20mA

G 2-wire; PROFIBUS PA; switch output

K 4-wire 90-253VAC; 4-20mA HART

L 4-wire 10,4-48VDC; 4-20mA HART

Y Special version, TSP-no. to be sepc.

030 Display, Operation:

A W/o, via communication

C SD02 4-line, push buttons + data backup function

Y Special version, TSP-no. to be sepc.

040 Housing:

A GT19 dual compartment, Plastics PBT

B GT18 dual compartment, 316L

C GT20 dual compartment, Alu coated

Y Special version, TSP-no. to be sepc.

050 Electrical connection:

A Gland M20, IP66/68 NEMA4X/6P

B Thread M20, IP66/68 NEMA4X/6P

C Thread G1/2, IP66/68 NEMA4X/6P

D Thread NPT1/2, IP66/68 NEMA4X/6P

I Plug M12, IP66/68 NEMA4X/6P

M Plug 7/8", IP66/68 NEMA4X/6P

Y Special version, TSP-no. to be sepc.

060 Probe:

CA ..... mm, rod 16mm PFA>316L

CB ..... inch, rod 0.63in PFA>316L

NA ..... mm, rope 4mm PFA>316

ND ..... inch, rope 1/6" PFA>316

43

44

060 Probe:

UA ..... mm, coax 316L

UB ..... inch, coax 316L

YY Special version, TSP-no. to be sepc.

100 Process connection:

AEK 1-1/2" 150lbs, PTFE>316/316L flange ANSI B16.5 (CRN)

AFK 2" 150lbs, PTFE>316/316L flange ANSI B16.5 (CRN)

AGK 3" 150lbs, PTFE>316/316L flange ANSI B16.5 (CRN)

AHK 4" 150lbs, PTFE>316/316L flange ANSI B16.5 (CRN)

AJK 6" 150lbs, PTFE>316/316L flange ANSI B16.5 (CRN)

AQK 1-1/2" 300lbs, PTFE>316/316L flange ANSI B16.5 (CRN)

ARK 2" 300lbs, PTFE>316/316L flange ANSI B16.5 (CRN)

ASK 3" 300lbs, PTFE>316/316L flange ANSI B16.5 (CRN)

ATK 4" 300lbs, PTFE>316/316L flange ANSI B16.5 (CRN)

CFK DN50 PN10/16, PTFE>316L flange EN1092-1

CGK DN80 PN10/16, PTFE>316L flange EN1092-1

CHK DN100 PN10/16, PTFE>316L flange EN1092-1

CJK DN150 PN10/16, PTFE>316L flange EN1092-1

CQK DN40 PN10-40, PTFE>316L flange EN1092-1

CRK DN50 PN25/40, PTFE>316L flange EN1092-1

CSK DN80 PN25/40, PTFE>316L flange EN1092-1

CTK DN100 PN25/40, PTFE>316L flange EN1092-1

KEK 10K 40, PTFE>316L flange JIS B2220

KFK 10K 50, PTFE>316L flange JIS B2220

KGK 10K 80, PTFE>316L flange JIS B2220

KHK 10K 100, PTFE>316L flange JIS B2220

YYY Special version, TSP-no. to be sepc.

500 Additional Operation Language:

AA English

AB German

AC French

AD Spanish

AE Italian

AF Dutch

AG Portuguese

AH Polish

AI Russian

AL Japanese

AM Korean

AR Czech

550 Calibration:

F4

5-point linearity protocol (® ä 46)

F9 Special version, TSP-no. to be sepc.

Levelflex FMP55

Endress+Hauser

Levelflex FMP55

570 Service: (Multiple options can be selected)

HC PWIS free, PWIS = paint-wetting impairment substances

IJ

Customized parametrization HART (® ä 46)

IK

Customized parametrization PA (® ä 46)

IW W/o Tooling DVD (FieldCare setup)

I9 Special version, TSP-no. to be sepc.

580 Test, Certificate: (Multiple options can be selected)

JA 3.1 Material certificate, wetted matallic parts, EN10204-3.1 inspection certificate

JE Conformity to NACE MR0175, wetted metallic parts

JD 3.1 Material certificate, pressure retaining parts, EN10204-3.1 inspection certificate

JE Conformity to NACE MR0103, wetted metallic parts

KE EPressure test, internal procedure, inspection certificate

KG 3.1 Material certificate+PMI test (XRF), internal procedure, wetted metallic parts, EN10204-3.1 inspection certificate

K9 Special version, TSP-no. to be sepc.

590 Additional Approval: (Multiple options can be selected)

LA SIL

L9 Special version, TSP-no. to be sepc.

600 Probe Design: (Multiple options can be selected)

MB Sensor remote, 3m/9ft cable, detachable+mounting bracket

M9 Special version, TSP-no. to be sepc.

610 Accessory mounted: (Multiple options can be selected)

NC Gas-tight feed through

OE Rod center washer d=37mm/1.45", PFA, interface measurement, pipe diameter DN40/1-1/2" + DN50/2"

O9 Special version, TSP-no. to be sepc.

620 Accessory Enclosed:(Multiple options can be selected)

PB Weather protection cover

R9 Special version, TSP-no. to be sepc.

850 Firmware Version:

75 01.01.zz, HART, DevRev02

77 01.00.zz, PROFIBUS PA, DevRev01

78 01.00.zz, HART, DevRev01

895 Tagging: (Multiple options can be selected)

Z1 Tagging (TAG), see additional spec.

Z2 Bus address, see additional spec.

Endress+Hauser 45

Levelflex FMP55

5 point linearity protocol

The following notes must be taken into account if option F4 ("5 point linearity protocol") has been selected in feature 550 ("Calibration").

The five points of the linearity protocol are evenly distributetd throughout the measuring range (0% to 100%).

In order to define the measuring range, Empty calibration (E) and Full calibration (F) have to be specified

6)

.

The following restrictions have to be taken into account when defining E and F:

R

F

E

Sensor

FMP55

A

100 %

B

0 %

C

A0014673

Minimum distance between reference point

(R) and 100% level

A ³ 250 mm (10 in)

Minimum measuring range

B ³ 400 mm (16 in)

Type of probe

Rod

Coax

Rope

Minimum distance from end of probe to 0% level

C ³ 100 mm (4 in)

C ³ 100 mm (4 in)

C ³ 1000 mm (40 in)

Maximum value for

"empty calibration"

E £ 3.9 m (12.8 ft)

E £ 5.9 m (19.4 ft)

E £ 9 m (29 ft)

• For rod and rope probes the linearity check is performed with the complete device.

• For coax probes the electronics is mounted to a reference rod probe and the linearity check is performed to this configuration.

• In both cases the linearity is checked under reference conditions.

Customized parametrization

If the option IJ "Customized parametrization HART" or IK "Customized parametrization PA" has been selected in feature 570 "Service", customer specific presettings can be selected for the following parameters:

Parameter

Setup ® Distance unit

Setup ® Empty calibration

Communication

• HART

• PA

• HART

• PA

Selection list / range of values

• in

• mm

0 to 10 m (0 to 30 ft)

6)

46

If E and F are not specified, probe dependent default values will be used instead.

Endress+Hauser