Safety and Instructional Decals. Exmark LAZER Z LZX940KC726, LAZER Z LZX980KC606, LAZER Z LZX801KA606SS, LAZER Z LZX980KC726, LAZER Z LZX680KC486, LAZER Z X-SERIES Operators, LAZER Z LZX801KA606, LAZER Z LZX740KC606CA, LAZER Z LZX740KC526, LAZER Z LZX749EKC606

Add to my manuals
64 Pages

advertisement

Safety and Instructional Decals. Exmark LAZER Z LZX940KC726, LAZER Z LZX980KC606, LAZER Z LZX801KA606SS, LAZER Z LZX980KC726, LAZER Z LZX680KC486, LAZER Z X-SERIES Operators, LAZER Z LZX801KA606, LAZER Z LZX740KC606CA, LAZER Z LZX740KC526, LAZER Z LZX749EKC606 | Manualzz

Safety

Safety and Instructional Decals

• Keep all safety signs legible. Remove all grease, dirt and debris from safety signs and instructional labels.

• Replace all worn, damaged, or missing safety signs.

• When replacement components are installed, be sure that current safety signs are affixed to the replaced components.

• If an attachment or accessory has been installed, make sure current safety signs are visible.

• New safety signs may be obtained from your authorized Exmark equipment dealer or distributor or from Exmark Mfg. Co. Inc.

• Safety signs may be affixed by peeling off the backing to expose the adhesive surface. Apply only to a clean, dry surface. Smooth to remove any air bubbles.

• Familiarize yourself with the following safety signs and instruction labels. They are critical to the safe operation of your Exmark commercial mower.

1-303508

1-403005

1-633922

98-5954

103-2076

11

Safety

107-2102

109-3148

1.

Fast

2.

Slow

109-7232

3.

Neutral

4.

Reverse

109-7330

109-7929

12

Safety

1.

Throttle–fast

2.

Throttle–slow

109-8483

All Units Except EFI

3.

Choke–on

4.

Choke–off

116-0157

1.

See Operator’s manual

116-0165

For Style B Slotted Nuts — See “Wheel Hub – Slotted

Nut Torque Specification” in the Maintenance section

116-0205

109-9361

Deck Drive Belt Routing

116-0211

116-0090

13

Safety

1.

Latch

116-0752

2.

Unlatch

1.

Throttle–fast

116-2844

EFI Units Only

2.

Throttle–slow

116-1654

116-2643

For Style A Slotted Nuts — See “Wheel Hub – Slotted

Nut Torque Specification” in the Maintenance section

116-3303

117–2718

14

1.

Fuel

2.

Empty

3.

Half

4.

Full

5.

Battery

Message Display

6.

Hour meter

7.

PTO

8.

Parking brake

9.

Neutral

10.

Operator presence switch

PTO Switch Symbols

1.

PTO–disengage 2.

PTO–engage

109-7069

Safety

15

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals