ACN Wireless Modem
Manuals and User Guides for ACN Wireless Modem. We found 1 manuals for free downloads User Guide
Below you will find brief information for wireless modem. This user guide describes how to connect your modem to a phone line, set up your email, and connect your computer to the internet using the modem. It also covers how to install telephone line filters and a splitter for your modem.
Key Features
High speed internet service
Wireless internet access
Email setup
Ethernet connection
Telephone line filters
Splitter for modem
Security measures
User manual online
Customer support
Pages: 1 ACN Wireless Modem User Guide
Brand: ACN Category: Modems Size: 1 MB
Languages: English
Open manualFrequently Answers and Questions
How do I connect my modem to the phone line?
Connect the phone cord to the DSL port (A) on the modem and to your wall telephone jack. Plug the modem power supply into the power inlet (C) and into the wall outlet.
What should I do if the power light on my modem turns red?
If the power light turns red during normal usage, power off the modem and wait 10 seconds. Power on the modem. If the issue is not resolved, please call ACN Technical Support at 1-866-913-3445.
How do I set up my email?
You can view all your “[email protected]” email by going to www.acn.net. Enter your Username and Password and click on ‘Go’.
How do I connect my computer to the internet using the wireless connection?
The modem comes ready to use. Once you have completed the steps from Section 1, “Connect the Modem”, turn on your computer. Scan for wireless networks using the instructions that came with your computer or wireless adapter. You will see a network named ‘ACNBB’. This is your wireless network. Highlight it and click “Connect”. Once the connection is made, you may open a browser and begin using the Internet.
How do I connect my computer to the internet using the Ethernet connection?
Once the connection is made, you may open a browser and begin using the Internet. If the device is working properly, the Ethernet and Internet lights will quickly flash to show data transmission.
How do I install telephone line filters?
Be sure to install a phone line filter between the wall jack and every device you connect to the jack, such as the telephone, fax machine and answering machine.
How do I install a splitter?
Use the Splitter (fig 3) to connect the modem and the phone to the same wall jack. Ensure the modem is connected to the side of the splitter labeled as MODEM.
advertisement