ADC AD-30V
Manuals and User Guides for ADC AD-30V. We found 3 manuals for free downloads: Installation manual, Service manual, User manual
American Dryer AD-30V Installation Manual
Brand: ADC Category: Electric laundry dryers Size: 963 KB Pages: 67
Languages: English
Table of contents
- 7 IMPORTANT INFORMATION
- 7 A. Receiving and Handling
- 8 B. Safety Precautions
- 10 SPECIFICATIONS
- 10 A. Specifications
- 12 INSTALLATION PROCEDURES
- 12 A. Unpacking/Setting Up
- 13 B. Location Requirements
- 14 C. Dryer Enclosure Requirements
- 15 D. Fresh Air Supply Requirements
- 16 E. Exhaust Requirements
- 22 F. Electrical Information
- 28 G. Gas Information
- 32 H. Steam Information
- 37 Preparation For Operation/Start-Up
- 38 J. Preoperational Tests
- 39 K. Preoperational Instructions
- 42 L. Shut Down Instructions
- 43 SERVICE/PARTS INFORMATION
- 43 A. Service
- 43 B. Parts
- 44 WARRANTY INFORMATION
- 44 A. Returning Warranty Cards
- 44 B. Warranty
- 44 C. Returning Warranty Parts
- 46 ROUTINE MAINTENANCE
- 46 A. Cleaning
- 47 B. Adjustments
- 47 C. Lubrication
- 48 D. Lint Drawer Removal
- 49 TROUBLESHOOTING
- 49 Microprocessor Controller (Computer) Models
- 55 Dual Timer Models
- 59 DATA LABEL INFORMATION
- 59 A. Data Label
- 61 REVERSING TIMER SPIN/DWELL ADJUSTMENTS
- 62 COMPONENTS
- 65 MANUAL RESET HI-LIMIT INSTRUCTIONS
American Dryer AD-25V Service Manual
Brand: ADC Category: Electric laundry dryers Size: 1 MB Pages: 73
Languages: English
Table of contents
- 6 A. SAFETY PRECAUTIONS
- 8 A. CLEANING
- 9 B. ADJUSTMENTS
- 9 C. LUBRICATION
- 10 SECTION III (INSTALLATION REQUIREMENTS)
- 10 A. ENCLOSURE AIR SUPPLY AND EXHAUST REQUIREMENTS
- 11 B. ELECTRICAL AND GAS REQUIREMENTS
- 11 C. OPERATIONAL SERVICE CHECK PROCEDURE
- 13 A. CONTROL PANEL (MICROPROCESSOR)
- 13 B. CONTROL PANEL (NON-MICROPROCESSOR)
- 13 C. CONTROL BOX (COMPUTER CONTROLS)
- 14 D. CONTROL BOX (NON-COMPUTER CONTROL)
- 14 E. COIN BOX AND VAULT
- 14 F. MAIN DOOR SWITCH
- 15 G. LINT COOP
- 15 H. TUMBLER
- 15 TUMBLER BEARING AND PULLEY ARRANGEMENT
- 16 J. IDLER BEARING
- 16 K. DRIVE MOTOR AND BLOWER MOTOR
- 16 L. TEMPERATURE SENSORS (COMPUTER CONTROLS)
- 17 M. NON-COMPUTER
- 17 N. GAS BURNER
- 17 O. ELECTRO-MECHANICAL STEAM DAMPER
- 18 P. STEAM DAMPER SYSTEM (AIR)
- 18 Q. ELECTRIC OVEN
- 18 R. SAIL SWITCH (ELECTRIC and GAS MODELS)
- 19 S. MOTOR CONTACTOR (1Ø MOTOR)
- 19 T. NON-REVERSING CONTACTOR (3Ø MOTOR)
- 20 U. HI-LIMIT THERMOSTAT (GAS and ELECTRIC MODELS ONLY)
- 21 SECTION V (SERVICING)
- 21 A. CONTROLS (COMPUTER)
- 25 B. CONTROLS (METER)
- 26 C. BURNER CONTROLS (Gas)
- 32 D. STEAM CONTROLS
- 35 E. ELECTRICAL OVEN CONTROLS
- 36 F. THERMOSTATS and TEMPERATURE SENSOR
- 38 G. SAIL SWITCH ASSEMBLY (Gas and Electric Models)
- 39 H. FRONT PANEL and MAIN DOOR ASSEMBLIES
- 42 TUMBLER and BEARING ASSEMBLY
- 44 J. IDLER and BEARING ASSEMBLY
- 45 K. DRIVE PULLEY
- 45 L. TUMBLER (BASKET)
- 48 M. V-BELTS (REFER TO ILLUSTRATION IN SECTIONS I, J, and K)
- 49 N. MOTOR
- 49 O. IMPELLOR
- 50 P. LINT SCREEN
- 51 SECTION VI (TROUBLE SHOOTING)
- 55 A. NO HEAT CONDITION (Gas Models)
- 57 B. NO HEAT CONDITION (STEAM MODELS)
- 59 C. NO HEAT CONDITION (ELECTRIC DRYERS)
- 61 D. NO START CONDITION
- 62 E. NO DISPLAY CONDITIONS
- 64 F. “dSFL” DISPLAY CONDITION
- 66 G. “dOOr” DISPLAY CONDITION
- 68 SECTION VII (TECHNICAL INFORMATION)
- 68 A. DATA LABEL
- 69 B. USING A MANOMETER
- 70 C. L.E.D. DISPLAY CODES
- 71 D. COMPUTER LOGIC AND WIRING DIAGRAM
ADC AD-30V Parts Manual
Brand: ADC Size: 1 MB Pages: 58
Languages:
Table of contents
- 4 Non-Coin Control Door Assembly for Models Mfd. as of July
- 5 Coin Control Door Assembly for Models Mfd. as of July
- 6 Control Door Assembly for Models Mfd. prior to July
- 7 Phase 5 Non-Coin Microprocessor Control Panel Assembly
- 8 Phase 5 Coin Microprocessor Control Panel Assembly
- 10 Coin and Non-Coin Control Box Assembly
- 11 Dual Timer “Tap Touch” Controls for Models Mfd. as of November
- 12 Dual Timer Control Panel Assembly for Models Mfd. prior to November
- 13 Non-Microprocessor Coin Meter Control Panel Assembly for Models Mfd. as of January
- 14 Non-Microprocessor Coin Meter Control Panel Assembly for Models Mfd. prior to January
- 15 Coin Vault Assembly
- 16 Front Panel Assembly for Models Mfd. with Steel Main Door as of July
- 17 Front Panel Assembly for Models Mfd. with Steel Main Door prior to July
- 18 Front Panel Assembly for Models Mfd. with Plastic Main Door
- 19 Main Door “Steel” Assembly
- 20 Plastic Main Door Assembly
- 21 Main Door Switch Assembly for Models Mfd. with Steel Main Door
- 22 Main Door Switch for Models Mfd. with Plastic Main Door
- 23 Tumbler / Support Assemblies
- 24 Sensor Bracket Assemblies for Models Mfd. as of July
- 26 Sensor Bracket Assemblies for Models Mfd. prior to July
- 28 Drop Lint Door Assembly for Models Mfd. as of July
- 29 Lint Trap Assembly for Models Mfd. as of July
- 30 Lint Drawer / Lint Drawer Switch Assemblies for Models Mfd. between August 10, 2000 and July
- 31 Lint Drawer / Lint Drawer Switch Assemblies for Models Mfd. prior to August
- 32 Tumbler Bearing Assembly for Models Mfd. as of August
- 34 Tumbler Bearing Assembly for Models Mfd. prior to August
- 36 Idler Bearing Assembly
- 37 Gas Burner Assembly for Models Mfd. as of May
- 38 Direct Spark Ignition Burner Assembly for Models Mfd. prior to May
- 39 Sail Switch / Hi-Limit Assemblies
- 40 Non-Reversing Motor Mount Assembly
- 42 Reversing T.E.F.C. Motor Mount Assembly
- 44 Electric Oven Assembly
- 46 Single-Phase (1ø) Motor, Electric Relay Panel Assembly
- 47 3-Phase (3ø) Motor, Electric Relay Panel Assembly
- 48 460-480 VAC 3-Phase (3ø) Motor, Electric Relay Panel Assembly
- 49 Reversing Electric Relay Panel Assembly
- 50 460-480 VAC Reversing Electric Relay Panel Assembly
- 51 Steam Coil / Air-Operated Steam Damper Assembly
- 52 Steam Coil / Mechanical Steam Damper Assembly
- 53 Outer Top / Back Guard Assemblies
- 54 Microprocessor Coin Acceptors Listing
- 55 Coin Meter Replacement Parts
- 56 Electrical Oven Component Application Chart
- 57 Additional Parts Available