Aastra DeTeWe OpenCom 100 OpenCom 107
Manuals and User Guides for Aastra DeTeWe OpenCom 100 OpenCom 107. We found 1 manuals for free downloads User Guide
Below you will find brief information for communications system OpenCom 100 OpenCom 107, system telephones OpenPhone OpenPhone 61, 63, 65, system telephones OpenPhone OpenPhone 71, 73, 75. The OpenCom 107 is designed to be connected to an ISDN basic access using the DSS1 protocol. System access (point-to-point) and multi-terminal access (point-to-multipoint) are both supported. It enables Internet access for all connected PCs by means of a common IP address. The OpenCom 107 has an integrated e-mail function that is able to use the POP3, APOP or IMAP4 protocols to check the Internet service provider for incoming mail. You can offer staff the possibility of dialling into the LAN by means of RAS access.
Key Features
Supports ISDN Basic Access (DSS1)
Integrated VoIP functionality
Supports DECT handsets
Web-based configuration
Integrated e-mail functionality
RAS access for remote users
OpenCTI 50 for dialling wizard
Supports up to 150 users
Pages: 152 Aastra DeTeWe OpenCom 100 OpenCom 107 User Guide
Brand: Aastra DeTeWe Category: Networking Size: 2 MB
Languages: English
Table of contents
Open manualFrequently Answers and Questions
What types of devices can be connected to the OpenCom 107?
You can connect analogue terminals, Euro-ISDN terminals, ISDN telephones (OpenPhone 52), DeTeWe system telephones, DeTeWe RFP 22 and RFP 24 base stations and DECT handsets (via an RFP 22/24 base station).
How is the OpenCom 107 configured?
Configuration is performed using a Web browser (Web console) accessible from a connected PC.
What are the basic settings of the OpenCom 107 on delivery?
The S01 port is configured for multi-terminal access, the S02 port for system access. The S03 and S04 ports are configured as internal S0 buses. The four Upn ports are configured for OpenPhone 63 system telephones. The four a/b ports are configured for analogue devices. The OpenCom 107 is configured ready for operation in Germany.
How can I integrate the OpenCom 107 into an existing network (LAN)?
The OpenCom 107 can be integrated into an existing network via the Ethernet port.
What is the purpose of the OpenCTI 50?
The OpenCTI 50 is an integrated dialling wizard that allows users to call up and use telephone functions on PCs without having to install a TAPI driver.
advertisement