Advanced Labelling Systems LabelStation
Manuals and User Guides for Advanced Labelling Systems LabelStation. We found 1 manuals for free downloads Setup Manual
The LabelStation is a thermal transfer label printer. It allows you to create and print labels, signs, bar codes, and much more. You can connect the printer to your PC and design labels using the LabelView software. The printer includes a number of features, including a self-peeling function for easy label application.
Key Features
Thermal transfer printing
Selectable print speeds
300 DPI resolution
Supports various bar code types
Self-peeling function
Parallel LPT interface
Expandable FLASH memory module
Cutter for guillotining labels
Pages: 37 Advanced Labelling Systems LabelStation Setup Manual
Brand: Advanced Labelling Systems Category: Label printers Size: 2 MB
Languages: English
Open manualFrequently Answers and Questions
How do I load die cut labels into the LabelStation printer?
Turn off the printer and open the printer cover. Disengage the printer carriage by pulling the grey printer carriage release lever on the left side of the platen. Slide the label supply roll spindle through the core of a label roll and attach the fixing tabs onto the spindle. Place the label roll into the label roll mount. Feed the label under the carriage and over the platen. Adjust the label guide to fit the width of the media. Engage the printer carriage; ensure both sides are locked down. Wind the label roll until it becomes adequately taut.
How do I load continuous rolls into the LabelStation printer?
Turn off the printer and open the printer cover. Disengage the printer carriage. Slide the label supply roll spindle through the core of a label roll and attach the fixing tabs onto the spindle. Place the label roll into the label roll mount. Feed the label under the carriage and over the platen. Adjust the label guide to fit the width of the media. Engage the printer carriage; ensure both sides are locked down. Wind the label roll until it becomes adequately taut. Turn the printer on.
What is the self-peeling function?
The self-peeling function takes the backing off the label and presents it ready for application. To employ the self-peeling function, load the label stock according to the following steps. Remove the front panel. Tear off the foremost one or two labels of the label stock, as befits the case. Feed the backing paper between the platen and the white “self-peeling” roller, as shown in the figure. Feed the backing paper through the backing paper opening in the front panel, as shown in the figure. Replace the front panel.
advertisement