1. manualzz.com
  2. computers & electronics
  3. networking
  4. print servers

Airlinkplus APSUSB2

Manuals and User Guides for Airlinkplus APSUSB2. We found 2 manuals for free downloads installation Guide, User manual

Below you will find brief information for APSUSB2. This document provides comprehensive instructions for setting up and configuring your network print server. It details how to connect the device to your network and printers, configure client IP addresses, access the web configuration utility to manage various settings, and add the network printer to Windows 2000/XP and Windows 95/98/ME operating systems. The guide also covers various configuration options within the web utility, including network protocols and device properties.

Key Features

  • Connects one USB and two 25-pin parallel printers to a network

  • Supports 10/100 Mbps Ethernet network connection

  • Configurable via Web Configuration Utility

  • Supports TCP/IP, NetBEUI, and AppleTalk protocols

  • Compatible with Windows 2000/XP/95/98/ME

  • Diagnostic LED indicators for Power, Link/Act, USB, LPT1, LPT2

  • Supports PJL (Printer Job Language) standard for bi-directional printing

  • Manual or automatic IP address assignment (RARP, BOOTP, DHCP)

Pages: 17 Airlinkplus APSUSB2 installation Guide

Brand: Airlinkplus Category: Print servers Size: 1 MB

Languages: English

Open manual

Other manuals and documents

13 Pages

User manual

Languages: German, English

Frequently Answers and Questions

What is the default IP address of the Print Server?

The default IP address of the Print Server is 192.168.1.254 with a subnet mask of 255.255.255.0.

How do I access the Web Configuration Utility for the Print Server?

To access the Web Configuration Utility, open a web browser and type the default IP address of the Print Server: 192.168.1.254.

What network protocols are supported by the Print Server?

The Print Server supports Ethernet Frame Types 802.2, 802.3, Ethernet II, SNAP (auto-switching) and Transport Protocols TCP/IP, NetBEUI, AppleTalk. It also supports TCP/IP Protocols BOOTP, SNMP, Telnet, TFTP, FTP, LPD, RARP, DHCP.

Can the Print Server settings be reset to factory defaults?

Yes, you can reset all settings to factory default and restart the Print Server using the 'Factory Reset' option in the Web Configuration Utility. The IP address will return to 192.168.1.254.

How do I add a new printer using the Print Server on Windows 2000/XP?

Go to Start, Settings, Printers (or Printers and Faxes for XP), select Add Printer, then choose 'Create a new port' and select 'Standard TCP/IP Port'. Enter the Print Server's IP address and port name, then configure the protocol as LPR with the correct Queue Name.

advertisement