Allen-Bradley 2030 Expansion Module

Manuals and User Guides for Allen-Bradley 2030 Expansion Module. We found 1 manuals for free downloads Installation instructions

The Allen-Bradley 2030 Expansion Module extends the capabilities of ElectroGuard® Safety Isolation Systems by increasing the number of Remote Lockout Stations (RLSs) or the maximum total wire length for the system. Available in 4-port and 10-port configurations, these expansion modules support the installation of up to 60 RLSs in a 110-1200A system or 40 RLSs in a 23-85A system. The modular design allows for series connections of up to three Expansion Modules.

Key Features

  • Modular design
  • 4-port & 10-port options
  • Supports up to 60 RLS (110-1200A)
  • Supports up to 40 RLS (23-85A)
  • Series connection (up to 3 modules)
  • Time delay option
  • RLS status signal output
  • UL, cUL, TUV EN954-1 Category 4, TUV EN60204-1, CE certified

Pages: 8 Allen-Bradley 2030 Expansion Module Installation instructions

Brand: Allen-Bradley Size: 203 KB

Languages: English

Open manual

Frequently Answers and Questions

What are the dimensions of the Allen-Bradley 2030 Expansion Module?
The 4-port module measures 12 inches x 13.71 inches x 6.12 inches. The 10-port module measures 10.56 inches x 23 inches x 6.69 inches. Consult a local Allen-Bradley distributor for dimensions of enclosed versions.
How many Expansion Modules can be connected in series?
Up to three Expansion Modules can be connected in series.
What is the maximum allowable cable length for RLS connected to the Expansion Module?
Maximum allowable cable lengths vary by wire gauge and are specified for both North American and outside-of-North America installations in Table 2 of the viewed document.
Can I use a customer supplied enclosure for the 2030 Expansion Module?
Yes, but you must make any conduit or cable fitting openings before installing the module to avoid contamination.
What is the purpose of the jumper wires that are installed on the connector plugs?
The jumper wires must be removed when wiring a Remote Lockout Station to the connector plug. They prevent proper operation of the RLS 'System Isolated' indicator light.

advertisement