6428 Инструкции

Allen-Bradley 500LC Control Module Kits

Инструкции и руководства для Allen-Bradley 500LC Control Module Kits. Мы нашли 1 инструкции доступные для бесплатного скачивания Installation instructions

Allen-Bradley 500LC Control Module Kits are designed to add optional control modules to Bulletin 500LC Lighting Contactors. These modules offer various control voltage options and are suitable for 2-wire, 3-wire, and Form 3 control applications. They can be field installed on the bottom or right side of the lighting contactor, depending on the number of poles. Each module is specific to the voltage marked on it. The kits include mounting screws and terminal connections. Ensure the control module is compatible with the control voltage of the lighting contactor.

Ключевые особенности

Control voltage options
2-wire, 3-wire, Form 3 control
Field installable
Bottom & side mounting
Voltage specific
Mounting screws included
Terminal connections

Страниц: 4 Allen-Bradley 500LC Control Module Kits Installation instructions

Бренд: Allen-Bradley Категория: Car kits Размер: 207 KB

Языки: English

Открыть мануал

Часто задаваемые вопросы

How can I connect a 500LC Control Module to a Bulletin 500LC Lighting Contactor?

The module can be mounted either at the base of the contactor (bottom mounting) or on the right side (side mounting) depending on the number of poles. Refer to the installation instructions for detailed guidance.

Which control module is suitable for my lighting contactor?

Choose the module based on the control voltage marked on it. Each module is specific to the voltage marked on it. Make sure to match the control module with the control voltage of your lighting contactor.

How can I connect the control wiring for the module and lighting contactor?

Connect the yellow wire to the O terminal and the orange/black wire to the C terminal of the lighting contactor. Connect the external control wiring to terminals 2, 3, and 4 of the control module as shown in the wiring diagram. The control wiring for the lighting contactor should be connected to terminal 5 on the control module and terminal L on the lighting contactor.