1. manualzz.com
  2. computers & electronics
  3. computers

Allen-Bradley ASEM 6300 On-Machine Monitors and On-Machine Panel PCs

Инструкции и руководства для Allen-Bradley ASEM 6300 On-Machine Monitors and On-Machine Panel PCs. Мы нашли 1 инструкции доступные для бесплатного скачивания Installation instructions

Allen-Bradley ASEM 6300 On-Machine Monitors and On-Machine Panel PCs are designed for industrial applications requiring full IP65 protection. They feature a powder-coated die-cast aluminum alloy chassis with anti-scratch treatment, a configurable button area with hard-wired connection mode accommodating an SIL-3 emergency stop (E-stop) button, and resolutions up to full high-definition (FHD). ASEM On-Machine Panel PCs are equipped with Microsoft® Windows® 10 IoT Enterprise 2016/2019 64-bit operating system and Intel processors.

Ключевые особенности

  • IP65 Protection
  • Configurable Button Area
  • SIL-3 E-stop
  • FHD Resolution
  • Windows 10 IoT
  • Intel Processors
  • Bottom/Top/VESA Mount

Страниц: 8 Allen-Bradley ASEM 6300 On-Machine Monitors and On-Machine Panel PCs Installation instructions

Бренд: Allen-Bradley Категория: Computers Размер: 1 MB

Языки: English

Открыть мануал

Часто задаваемые вопросы

What kind of power supply is required for the ASEM 6300 On-Machine product?
It requires a 24V (18…32V) power supply that meets the requirements of safe extra low voltage (SELV) according to IEC/EN/DIN EN/UL60950-1 and IEC-61010-2-201.
What are the environmental requirements for installing the ASEM 6300 On-Machine product?
The installation must be indoors and non-hazardous, with ambient air temperature between 0…+50 °C (32…122 °F) for all processors and relative humidity of 20…90% noncondensing at 0…40 °C (32…104 °F).
How do I connect the ground wire for the ASEM 6300 On-Machine product?
Use a ground wire with an insulation color approved by your local inspection authority and a cross-section of 2.5 mm² (AWG 14) with copper conductor certified for operation at least 75 °C (167 °F). Connect the stripped end of the grounding wire to the open end of the lug and crimp it securely to the wire. Install the ground wire to the ground (earth) screw according to the sequence shown in the manual.

реклама