Amcrest NV2104E
Manuali e guide per l''utente per Amcrest NV2104E. Abbiamo trovato 1 manuali per download gratuiti User Guide
Below you will find brief information for NVR. This guide covers setting up the NVR, connecting cameras, configuring recording schedules, and accessing the NVR remotely.
Caratteristiche principali
Easy camera setup
Remote access
Motion detection
Recording schedules
Email alerts
Hard drive installation
Amcrest IP Config Software
Amcrest View App
Amcrest View Web Portal
pagine: 82 Amcrest NV2104E User Guide
Marca: Amcrest Categoria: Multimedia software Dimensione: 5 MB
Lingue: English
Apri manualeRisposte e domande frequenti
What is the default password for the NVR?
The default password is 'admin'.
How do I add cameras to the NVR?
You can add cameras using either the device search method or the direct connection (PoE) method. The device search method is recommended for WiFi cameras, while the direct connection method is recommended for PoE cameras.
How do I set up motion detection?
You can set up motion detection by configuring regions and sensitivity/threshold settings for each camera. The NVR will then record footage when motion is detected in those regions.
How do I access the NVR remotely?
You can access the NVR remotely using the Amcrest IP Config Software or the built-in interface method. The Amcrest IP Config Software method requires you to install the software on your computer and then connect to the NVR using its IP address. The built-in interface method requires you to use a web browser and navigate to the NVR's IP address.
How do I install a hard drive in the NVR?
You can install a hard drive in the NVR by powering off the device, disconnecting the power cable, and then opening the case. Once the hard drive is installed, you can power on the NVR and start recording footage.
annuncio pubblicitario